Considerations for installing a railed transfer car

The traditional means of rail transfer car track installation is the low-voltage electric transfer car laid track and wire channel installed in the treated cypress pine sleeper, but this durability disease is not very high, and now gradually changed to the use of reinforced concrete foundation as a low-voltage electric transfer car track foundation. In the rail in place, pad good insulation mat and spare parts in place, check the centre of the rail, gauge and level is qualified, but also measure the insulation resistance value of the rail, check the phase, meet the requirements and then fixed.

Electric transfer car is a common electric rail transport vehicle, the current workshop is in urgent need of handling tools, especially high temperature, large tonnage and other characteristics of the workpiece. In general, low-voltage electric transfer car application is more, not affected by the cable line, but also not limited by the distance, but subject to the constraints of the track, shall use the insulation treatment of the track environment, then, in terms of track installation, low-voltage rail electric transfer car should be how to do?

First, remove the loose concrete and stones inside the reserved holes of the equipment foundation and around the electric transfer truck, then clean the debris inside the reserved holes, and then use a small blower to clean the holes. If you encounter any reinforcement leaking out of the reserved holes, you should deal with it in time to ensure that the reinforcement cannot contact the pre-built bolts.

Tracked transfer vehicle is a rail-type transport vehicle, need to lay the track on the ground, the track is generally I-face contact track; secondly, it is an electrically driven vehicle, automatic operation under the motor reducer drive, again it is a kind of transfer vehicle, the table is flat without compartment cover, special circumstances can also be non-flat but no compartment cover, the car body without steering wheel only forward and backward direction (even if the turn also city by the track turn). Explosion-proof electric flat cars such vehicles have a simple structure, easy to use, large load-bearing capacity, not afraid of dirty and not afraid of smashing, easy maintenance, long service life, etc., because of its convenient, strong, economic, practical, easy to clean up and many other advantages, become the enterprise plant internal and plant and plant and plant between the short distance between the fixed point frequent transport of heavy objects.

As the low-voltage rail electric transfer car runs on the track and needs the track to provide electricity, that is to say, the track has to be both a running track and a feeder track. With such requirements, insulation is required between the tracks and between the wheels and the car body, especially special insulation treatment is required for the track installation, and the construction requirements are relatively high.