10 ton ladle transfer trolley

10 ton material handling transfer trolley, AC power will be converted into AC 36v two-phase and connected to two rails respectively, then 10 tons transfer car will be AC 36v on the rail into the bottom of the electrical box accurate transfer car. Then convert AC 36v to DC 36v, and then control DC motor through DC control system, so that 10 tons transfer car accurately start, stop, forward and backward, speed regulation, etc.

The height of 10 ton automatic transfer trolley for outdoor and indoor operation can affect many factors, first of all, the labor intensity, the lower height of the flatbed truck can greatly improve labor efficiency, save workers’ physical strength, reduce unnecessary workers’ costs. But some working conditions also need a higher height of the flatbed truck, such as hydraulic lifting flatbed truck, because of its special nature of work, the table surface can not be too low, the height of the hydraulic cylinder determines the height of the flatbed truck. Whether it is a super high table electric flat car or super bottom table rail flat car.

10 ton transfer cart for special transporting safety factor stipulates high: most of the load is heavy, so in the delivery of the whole process to ensure the safety of staff, objects, not easy to produce knocking, chaos and other safety production accidents; transport work capacity: the net weight of the template, some can reach hundreds of tons; flexibility, lightweight, net weight of the mold shell will also volume higher, in moving must increasingly more indoor space.

Translated with www.DeepL.com/Translator (free version)

10 ton material handling transfer trolley precast concrete workshop using is powered by the battery source, the battery is now the emerging energy, many products are in common use battery to replace human labor. Tractor without external cable line, do not have to connect a very long cable line to energize, can be used in a straight line, arc line, corner route, do not have to worry about the safety problems brought by too long cable line. The vehicle’s battery is convenient to replace, any occasion can be applied, regardless of the rain explosion-proof high temperature occasions and so on. The battery life expires the replacement price is not expensive. The charger of the tractor is chosen by the intelligent charger, full automatic power off, safe and convenient.

Translated with www.DeepL.com/Translator (free version)

10 ton transfer trolley for steel coil can be understood from the name that the series can be customized according to the size, weight and ambient temperature of the package, the external temperature of the package and other conditions under different needs of customers, and can also be made according to different needs and drawings provided by the customer.

10 ton transfer trolley for sale has the advantages of low level, reinforced table, large load capacity, unlimited working hours, simple operation and easy maintenance. Now most heavy manufacturing companies are starting to use rail-driven flatbed trucks. As the size of the business continues to expand, the number of workshops use 10 ton transfer trolley has begun to increase.

10 ton motorized rail transfer trolley construction are composed of power distribution equipment, motor control equipment, body structure, transmission system walking equipment, etc. The stainless steel plate should have high compressive resistance in order to meet the provisions of large load capacity.

Wheel transfer trolley for steel shop 10 ton has been adopted by a large number of factory shops, and because of its simple structure, many factories can choose to make their own railcars, but because of its direct relationship with productivity. In order not to affect your use. We suggest that you choose a professional manufacturer to consult before purchasing parts, Henan Perfect Handling Equipment Co. Frame design drawings, track installation drawings, etc.

Coil transfer trolley for aluminum product transport 10 ton with battery as the source of electric power is more convenient and safe to use as it is free from the bondage of cables and can be operated by remote control, which is suitable for longer distance rail transportation system. Its application range is: heavy industry, light industry, machinery, petroleum, metallurgy, mining, chemical industry, ships, etc. The materials that can be loaded are: steel coils, aluminum coils, galvanized coils, transformers, cable trays, casting parts, motors, containers, carriages , container tanks, pressure vessels, etc.

10 ton industrial transfer trolley is powered by the battery in the transfer trolley. The DC motor and gear reducer are controlled by a DC control system that drives the wheels to start, stop, move forward, backward, accelerate and decelerate the transport vehicle. This 10-ton transfer trolley can be used anywhere without the need for a new track.
-Safer and more flexible.
-No tracks required
-Unlimited driving distance
-No wires outside the vehicle for safe and easy operation
-Adjustable speed

The customization of 10 ton automatic transfer trolley for workshop needs to be tailored to the specific needs of the user. The size of the load needs to be calculated and designed by a technician. 10 ton automatic transfer trolley for workshop is a special kind of walking car which can turn flexibly with a small turning radius. Trackless steering vehicles are mainly powered by batteries. For turning, the turning vehicle is equipped with a special steering mechanism that can be used for turning paths such as C, S or straight + curved. The flexibility of a 10 ton automatic transfer trolley for workshop is less than that of a rail steered car, but the turning radius requirement needs to be customized to the table size of the transfer car. The trackless flat car is driven by two electric motors. It rotates mechanically and operates flexibly.

10 ton ladle transfer trolley is produced by Henan Perfect Handling Equipment Co., Ltd. and has a load capacity of up to 300 tons. It has stepless speed change and stopping device in case someone stops. The operation is very simple. Only one handle or wireless remote control is needed to control the normal operation of the vehicle. It adopts universal wheels with flexible rotation to realize fully automatic operation.

Automatic transfer trolley for transporting steel structure parts 10 ton is a kind of large tonnage load railcar used in factory workshop, which needs to lay the track when using, the factory railcar is driven by motor and reducer, and travels on the track, and the factory railcar is controlled by the on-board control box. The factory railcar is driven by motor and reducer and travels on the track. The factory railcar adopts electric motor and reducer as the driving system, which has the advantages of simple operation, no pollution, safety, smooth and convenient operation compared with forklift and other transfer tools, the factory railcar adopts box beam structure, all welded by steel plate, with a load factor of 150%, strong load capacity, the size of the table can be customized, the number of load, no need for manned operation, relatively low labor cost, with low pressure track, cable reel, battery, sliding contact. Cable reel, battery, slip wire and other power supply methods, flexible style, can be selected according to the working conditions of the workshop.

10 ton motorized rail transfer trolley is mainly composed of power supply, transmission mechanism, steel structure load-bearing frame, steering, driving mechanism, control module and fault diagnosis module. The power supply of the trackless electric flat car can choose battery, discharge motor or cable. 10-ton transfer car is equipped with alarm and detection device, which will immediately alarm and automatically stop when encountering objects, and the vehicle is equipped with fully automatic intelligent charger.

10 ton material transfer trolley is powered by a large-capacity battery-powered remote control trackless transfer car. It adopts DC motor motion speed control, multi-wheel hydraulic steering and pull-wire remote control type. The solid rubber wheels run directly on the ground and the operation is not restricted by the ground. Ensure that the ground is not damaged, and realize two-way driving and 360-degree turning in the same position.

10 ton transfer trolley on rail converts AC to AC 36V two phases, which are connected to two rails, and then the 10-ton transfer vehicle imports AC 36V from the rails into the electrical box at the bottom to accurately transfer the vehicle. Then the AC 36V is converted to DC 36V, and then the DC motor is controlled by the DC control system to make the 10-ton transfer vehicle start, stop, forward and backward, speed regulation, etc.

10 ton rail transfer trolley is a small tonnage transfer truck. It overcomes many inconveniences of rail type electric transfer car. 10 tons electric transfer car can be completed outside and inside the workshop without rail free rotation. There is no need to lay rails, it does not affect the traffic, does not hinder the production, the flat car is more flexible and the operation is more humane.

The customization of the 10 ton mold transfer trolley needs to be customized according to the specific needs of the user, and the size of the load needs to be designed by the calculation of the technical staff. 10 ton mold transfer trolley is a kind of using special walking trolley, can realize flexible turning under the smaller turning radius. The trackless turning car is powered by battery. In order to achieve turning, the turning car is equipped with a special steering mechanism, can C, S or straight line + curve and other turning path, the degree of flexibility of the 10 ton mold transfer trolley is less than the rail turning car, but the turning radius requirements need to be customized according to the size of the transfer car table. The 10 ton mold transfer trolley is driven by two motors and uses mechanical turning for flexible operation.

10 ton ladle transfer trolley for warehouse is a flexible and strong handling equipment, Perfect Transfer Cart Company is a handling equipment company that integrates research and development, design, production and sales. Specializing in the production of 1 – 1300 tons range of various tonnage of various models of electric hydraulic trucks and electric handling trucks.

10 ton coil transfer trolley has the advantages of compact structure, beautiful appearance, accurate positioning, simple operation, smooth turning and driving, strong climbing ability, long driving distance, low noise, easy, no cable and easy remote control, suitable for various kinds of transportation, widely used in metallurgy, coal, electromechanical, heavy industry, shipbuilding, light industry and other enterprises.

10 ton trackless transfer trolley, powered by a large-capacity battery, is powered by a remote control trackless transfer car. It moves and speed regulation by DC motor, multi-wheel hydraulic steering, cable and remote control type. The solid covered rubber wheels run directly on the ground and the operation is not restricted by the ground. It ensures that the ground is not damaged and can achieve two-way driving and 360 degree turn in the same position.

10 ton wheel transfer trolley is mainly composed of power supply, transmission mechanism, steel structure load-bearing frame, steering, walking mechanism, control module and fault diagnosis module. You can choose battery, discharge motor or cable as the power supply of the trackless electric flat car. 10-ton transfer car is equipped with warning and detection device, which will immediately issue alarm and automatically stop when encountering objects, and the car is equipped with automatic intelligent charger.

10 ton transfer cart is low level, the table is strengthened, the load capacity is large, the working hours are not limited, and the operation is simple and easy to maintain. Now most of the heavy manufacturing enterprises start to use rail-powered flatcars. As the scale of enterprises continues to expand, the number of workshops purchase 10 ton transfer carts also began to increase.

Henan Perfect Transfer Carts’ 10 ton coil transfer trolley for die plant cargo handling is a kind of wheeled handling equipment that can be steered by manual control, with handle, remote control, table and fixed wheels running together, walking and steering at will, not limited by space and ground, the car is equipped with safety warning and safety detection devices, immediately alarm and automatic stop when encountering pedestrians or obstacles, trackless electric flat car can be installed with positioning and clamping devices, lifting platform and other auxiliary devices as required.

10 ton load transfer trolley is a kind of small ton transfer car. It overcomes many inconveniences of rail electric car. 10-ton electric transporter can achieve trackless free rotation inside and outside the workshop. There is no need to lay railroad track, which will not affect the traffic and production. The flat car is more flexible and the operation is more humanized.

10 ton load transfer trolley for polypropylene is a kind of wheeled transport equipment that can be steered at will by manual control. Its power supply method is battery power supply, and the driving and carrying wheels can choose high-strength polyurethane rubber solid tires or pneumatic tires, which get rid of the dependence of the rail flat car on the ground track and do not destroy the infrastructure, and can walk on the ground at will, turn at will without space and ground restrictions, and can change the direction of travel and route at any time, which is very suitable for use on occasions where the running route is not fixed.

Translated with www.DeepL.com/Translator (free version)

10 ton slab transfer trolley is powered by a battery in the transfer cart. The DC motor and gear reducer are controlled by the DC control system to drive the wheels to make the transporter start, stop, forward, backward, accelerate and decelerate, etc. The 10-ton transfer truck can be used anywhere, without the need of the railroad tracks.
– Safer and more flexible.
– No need for tracks
– No limitation of driving distance
– No wires outside the car, safe and easy to operate
– Speed adjustable

10 ton automatic transfer trolley is produced by Henan Perfect Handling Equipment Co., Ltd. with a maximum load capacity of 300ton hundred tons, stepless speed change, manned stopping device, extremely simple operation, only a handle or wireless remote control can control the normal operation of the car, with universal wheels, flexible turning and fully automatic operation.

Ladle transfer trolley for steel coil 10 ton, also called electric flat trolley, has been widely used in various fields. It is suitable for the loading and unloading of equipment in freight logistics, seaports, metallurgical industry, etc. Its key distribution method is partial centralization.