5 tons electric coil transfer trolley automatic charging hand operated

Electric aluminium coil transfer cart wireless remote control Customizable
Appearance:Table Size, Table Material, Table type, Rated Load, Color, Wheel Base,Detachable structure etc.
Special Function: Hydraulic Lift Table, Dumpling, Climbing, V shape, PLC control system, Automatic Positioning, clamping device, Anti-explosion, Heat-proof function, Weighting system etc.
Safety Device: Alarm light, Emergency stop button, Radar detector, Buffer, V shape support, Guardrails etc.
Special Design: Round corner, Hold pendant box, Lifting hole etc.

Coil Transfer Cart 70 Ton for Steel Coil Handling Indoor is a space-saving, ergonomic transfer cart that helps you reduce the use of forklifts and overhead cranes to move and handle large payloads, while increasing safety.The Coil Transfer Cart 70 Ton for Steel Coil Handling Indoor provides safe, smooth and efficient transport of heavy and oversized loads in manufacturing environments.

Rail mold handling coil transfer cart warehouse battery motorizeds are available with a number of drive and control systems. Drive systems include gear reducers, shaft drives and single wheel drives. Typical units are equipped with hand-held suspension controls for the operator to control the rail mold handling coil transfer cart warehouse battery motorized back and forth along the track. The average travel speed can be customized to allow the operator to operate the unit on foot with the vehicle. The pendant can be mounted on any of the four corners of the vehicle, allowing the operator to walk along the front of the vehicle during operation. Our rail mold handling coil transfer cart warehouse battery motorizeds also feature semi-automatic and fully automatic control systems to meet the needs of specific applications.

5 tons electric coil transfer trolley automatic charging hand operated must be operated and maintained by a dedicated person, and must not be used by non-operators. Before operation, check whether there are any obstacles on the track, and whether the electrical wiring and control switches are safe and reliable. The 5 tons electric coil transfer trolley automatic charging hand operated on the track must ring to start smoothly, pay attention to whether there is an abnormality around, and be ready to stop at any time. There is no collision with the stop at the end of the track. Rapid changes in direction of travel are not allowed. It is strictly forbidden to maintain and clean the 5 tons electric coil transfer trolley automatic charging hand operated during operation. Overloading is not allowed when loading articles. Projects should be evenly distributed. In the event of a sudden power failure, the control switch should be reset to zero. At the end of the work, the power supply must be cut off, the load must be removed and the equipment must be cleaned.

Aluminium coils handling 15t platform transfer cart is a kind of large tonnage load railcar used in the factory workshop, which needs to lay the track when using, aluminium coils handling 15t platform transfer cart is driven by motor and reducer. The aluminium coils handling 15t platform transfer cart is driven by an electric motor and reducer and travels on a track, with the on-board control box controlling the start, stop, forward and backward movement of the truck. The aluminium coils handling 15t platform transfer cart has a box beam structure, all welded by steel plates, with a load factor of 150%, strong load capacity, the size of the platform can be customized, the number of loads, no need to operate, relatively low labour costs, with low-voltage rail, cable reel, battery, slip wire A variety of power supply methods, flexible style, can be selected according to the working conditions of the workshop.

360 v ac motor coil transfer wagon handing heavy load 8 ton material machine is one of our common and mature
product, which is customized as per customers’ true demand. Such as power supply, operation system,control system, track or no track,steerable, wheelstype, cart framestructure and so on, and then provide proper solution to you.

When we buy battery powered material coil transfer cart for industry, we should not only look at the price of battery powered material coil transfer cart for industry, but also look at the battery powered material coil transfer cart for industry own characteristics and role, and whether the car is suitable for work in their own work environment, today to give you the main introduction to battery powered material coil transfer cart for industry The characteristics of itself.
1、Load weight delivery: battery powered material coil transfer cart for industry is committed to the delivery of design solutions for goods, the role of the delivery, operation spacing beyond 60 meters, must lift the row of wire to assist the coiled wire.
2、Lift: battery powered material coil transfer cart for industry is available according to the customer must add hydraulic press, mechanical equipment and other lift equipment, in the original basic to achieve the role of the lift.
3, coiled wire electric flat car tipping: battery powered material coil transfer cart for industry whether according to the customer must increase the hydraulic machine, machinery and equipment such as tipping equipment, in the original basically to achieve the role of tipping.
4、Cabinet countertop tilting: battery powered material coil transfer cart for industry can add rollers, rollers and other equipment according to the customer’s need, to achieve the original basic cylinder class steel rotation and planar figure class steel linear in the role of moving.
Perfect Transfer Cart can be designed according to the user’s needs to fit your coil rail flatbed cart, reducing the user’s investment costs, we have professional technical, customer and after-sales personnel, can quickly solve the problem for you.

Explosion proof electric coil transfer flatbed cart for spray booths are widely used in construction, steel mills, shipyards, foundries and other fields, and can also be combined with other functions, such as lifting, tilting, weighing systems, etc. The frame uses two longitudinal beams and several beams to make the table face evenly stressed and not deformed. Polishing, dust removal, make the appearance beautiful. Through our understanding and site investigation, through our process design, fire-resistant bricks and heat-resistant fabrics are added to the surface of the trolley to effectively isolate high temperatures. The transmission of logistics temperature can protect the electrical components very well, and the customer is very satisfied.

Outstanding was the design and construction of a material handling wire coil transfer cart load of 40 ton, or more specifically, a self-propelled OMNI oriented heavy duty platform cart to manage the movement of molds within the plant. The benefits are safety, faster in-plant mold transport, increased plant productivity and optimized use of space in the mold storage area. We can design roller racks, pallets, and lifting devices to transport materials to match the transfer vehicle according to the customer’s needs and characteristics.

Perfect Transfer Cart offers rail traverser ferry-heavy duty coil transfer cart, Perfect Transfer Cart manufactures rail traverser ferry-heavy duty coil transfer Perfect Transfer Cart’s rail traverser ferry-heavy duty coil transfer cart can be used for various applications such as cargo handling and rail transportation. Cargo transportation and rail transportation ferries can also be used at the same time. Usually, the ferry transfer car is divided into two sections: upper and lower body, one section is used for transferring and one section is used for ferrying. At the same time, we have a professional and excellent team to make three-layer body according to your needs to meet the requirements of the work site. It is widely used in metallurgy, machinery manufacturing, heavy manufacturing, mold manufacturing, steel plate distribution, building materials handling and other industries.

Small platform industrial rail-mounted rail coil car with lifting device has a simple structure, easy to use, large load capacity, no fear of dirt, easy maintenance, long service life, etc., due to its convenience. Sturdy. Economical. Practical. Easy to clean and many other advantages, it is the first choice for transporting heavy objects within the production workshop of the enterprise and between the workshop and the factory room and the workshop for short distances.
Scope of application: stamping. Welding. Painting. General assembly paint. Electric flatcars. General assembly paint.
Small platform industrial rail-mounted rail coil car with lifting device mainly used in mobile lifting trucks, etc.; brickworks. Kiln plants. Refractory plants. Ceramic plants. Electric kiln loaders for roasting plants, etc.. Electric kiln discharge trucks, etc.; engineering. Electric cleaning trucks for sanitation, etc.; construction. Electric furnaces. Electric furnaces, etc.
The small platform industrial rail-mounted rail coil car with lifting device is also suitable for grinding mills, mineral processing plants, foundries, chemical plants, dumps, farms, etc. Electric flatbed trucks without fuel drive, a feature not available in any fuel vehicles, this feature is not only suitable for factories but also for short distance transport.

Industrial Coil Transfer Carts are ideal for transporting coils throughout your facility without limitations from track length and distance. Industrial Coil Transfer Cart is designed with two swivel and two driven wheels.Track mounted transfer cart travels along a fixed path.

Coils Material Handling Transfer Cart used to transport metal coils, rolls and other cylindrical loads from one area of your facility to another across smooth to semi-smooth floors.Coils Material Handling Transfer Cart also be used in conjunction with overhead cranes in your workshops to handle and transport loads between crane bays.

25t electric remote control steel coils handling crane tracks trailer, workpiece with castings, working temperature of 500 degrees.
25t electric remote control steel coils handling crane tracks trailer according to the user’s requirements, the reducer and motor are protected by heat insulation rock wool, and there are safety devices for stopping when people are encountered at both ends of the car body, the detection distance is 0.3~3 meters, and the detection distance is adjustable.
In order to make the 25t electric remote control steel coils handling crane tracks trailer get better protection, a fender is added on the platform of the dolly, aiming to make the low voltage electric flat car can better lay another layer of sand.

Heavy load capacity coil transfer cart has the safety performance and mobile and flexible performance, can travel on curves, turnouts, running distance is not limited. It has no requirement for track insulation, convenient auxiliary track, low cost and simple operation, and can run long distance indoors and outdoors, which is very convenient for factory transportation and plan arrangement.
Heavy load capacity coil transfer cart suppliers produce heavy load capacity coil transfer cart, whether no load or heavy load, are low even start, so that not only conducive to mechanical transmission, but also to protect all kinds of electrical appliances, invariably extend the service life of the flat car. Mainly suitable for long distance cargo transportation, easy to lay the track, simple operation, can be used on any track of the same gauge.

The large load coil transfer cart has reached a wide range of applications in new or rebuilt enterprise factories and plants, and is also used in the internal transportation of some large equipment plants and workshops.
This kind of large load coil transfer cart has a common characteristic, that is, “short”. Short to what extent? The height of the car is only twenty to thirty centimeters. But its load is not small, from a few tons to dozens of tons are available. Although the car “short”, but it is fully functional, high security. Leakage protection, under-voltage protection, etc. Everything is a lot. Some also realize the automation control.
Large load coil transfer cart can also realize the turn on the track, when the turn is less than 40 degrees can be set using the rail turnout form. When the bending curvature is greater than 40 degrees, it is necessary to set a turntable rotary mechanism at the turn, so that the turn can be realized.

battery operated hydraulic lifting system steel coil trailers material handling equipment has the ability to work smoothly, anti-collision coordination, running distance is not limited, through the motor speed control motor to provide power low noise, strong carrying capacity can save human capital and costs, the operation will not produce exhaust emissions, environmental protection effect is practical and convenient, no special requirements for the track, this is the characteristics of these products, but in the use of the time or to pay attention to a point.
battery operated hydraulic lifting system steel coil trailers material handling equipment is a flat car running on the track with a battery, equipped with a power switch, the battery is installed in the flat car, the switch power supply according to the power system to the traction motor power supply start, stop, forward, reverse, shift, etc..

Warehouse Coil Handling Vehicle is designed for coil material handling, it can widely apply in many fields, such as workshops, automotive molds, material handling, aerospace equipment workshops, air-conditioning workshops, casting molds, etc.Warehouse Coil Handling Vehicle function with 360° no corner protection, dead man automatic stop and so on to protect the safety. Touch screen, rocker.which make the design more humanization.

Automatic charging coil transfer cart 30 tons maintenance free batterys are mainly used to transport metal coils, pipes, beams or other round materials. We can design the capacity of the cart, the size of the table, the power supply style according to your working conditions. In order to protect the round cargo from falling, the plant transfer vehicle can be equipped with a V-bracket according to the customer’s application requirements.
The automatic charging coil transfer cart 30 tons maintenance free battery is an electronic material handling tool for coil transportation. This type of track bogie is usually equipped with a V-shaped or E-shaped frame on the transfer bogie platform. Those V-shaped or E-shaped frames prevent the material from slipping off the rail bogie. V-frame or E-frame can be divided into two types: movable or inactive.

Workshop light alarm q235 25t rail coil transfer cart is a kind of wheeled transport equipment, with handle, remote control, table, fixed wheels together, walking and turning at will, not restricted by space and ground, can run in the route is not fixed occasions, the cart are equipped with safety warning and safety detection device, encounter pedestrian or The chain should be adjusted to a suitable tightness and flexibility, the chain spring should be installed on the outside, the open end should be opposite to the direction of movement and should not touch the chain cover or crank. If the chain is tight, adjust the chain nut counterclockwise as above to move the rear wheel slightly forward.

The battery powered trackless coil transfer cart is a trackless material handling cart, which means that the cart can be moved on concrete floors without the need to install tracks. battery powered trackless coil transfer cart transfer cart has at least two casters that allow for 360 degree motorized rotation without any damage to the floor. It is powered by battery, so it can rotate freely without any ropes. The battery powered trackless coil transfer cart is controlled by push buttons and speed controls for forward and reverse, left and right turns. PLC control system can also be added to achieve full automation.

50 tons copper mine coil transfer cart is widely used in various factories and industries, such as assembly line (ring production line, grinding production line), metallurgical industry (steel ladle), bearing transportation, shipbuilding industry (maintenance, assembly, container transportation), workshop workpiece transportation, lathe transportation, steel mills (steel structure such as billet, steel plate, steel coil, steel pipe, profile, etc.), Construction (bridges, simple buildings, concrete, concrete columns), oil industry (oil pumps), pumping rods and parts), energy (polysilicon, generators, windmills), chemical industry (electrolytic tanks, burners, etc.), railroads (track maintenance, welding, tractors).

The large dimension heavy load industrial steel coil railway trolley cable reel power has the following advantages.
1. Large dimension heavy load industrial steel coil railway trolley cable reel power cannot rely on guiding devices.
2. Large dimension heavy load industrial steel coil railway trolley cable reel power can be driven in both directions and steered 360 degrees
3. Large dimension heavy load industrial steel coil railway trolley cable reel power with DC drive and large load capacity.
4. Large dimension heavy load industrial steel coil railway trolley cable reel power with small turning radius and flexible operation
5. Large dimension heavy load industrial steel coil railway trolley cable reel power small braking distance, safe and reliable.
6. Large dimension heavy load industrial steel coil railway trolley cable reel power the steering mechanism runs smoothly and is easy to maintain.

Electric Coil Transfer Trolley is suitable for transporting heavy loads in high duty applications. Electric Coil Transfer Trolley also ideal for long distance transportation. The rails are required to be insulated.

Coil Material Handling Vehicle can be designed to be steerable or moved in a controlled way. Coil Material Handling Trolley provides excellent flexibility and maneuverability for material transportation. This type of coil transfer cart is suitable for light duty to moderate applications.

Coil transfer cart rail transport platforms have become a new favorite in the field of global industrial transportation, and the market is hot, especially workshop transportation. Coil transfer cart rail transport platforms with rolls can run on vertical tracks, “L” tracks, “S” tracks, curved tracks, etc. Only when fully charged, the trailer with roll can operate freely and the operating distance is not limited. coil transfer cart rail transport platforms can be customized to your specified requirements. It can be equipped with hydraulic lifting device, V-frame, U-frame, rubber mat, wooden mat, weighing device, etc. Coil handling and transfer trailers can be used in a variety of occasions, such as explosion-proof, high temperature resistance, rust-proof, ferries, flammable environments, anti-slip and so on.

The 5 tons battery powered coil transfer cart remote control move on cement floor Is A Battery-Powered Transport Handling Flat Trolley Car Device. The Driving Distance Of The Series Of Transport Coil Carts Are Not Limited, And The Requirements For Track Laying Are Not High.
1. The Special Track Load Tonnage That Is Laid On The Ground Is Large.
2. Suitable For Materials To Be Transported Or Transported Within A Fixed Range.
3. Carrying Tonnage, Size, Function Can Be Customized.
4. The Choice Of Power Supply Mode Can Be DC, AC, And Low Voltage.
5. Application Of High Temperature, Cold, Spray Booth, Sandblasting Room, Etc..

1-5 ton coil transfer carts are typically used in factories or warehouses to move plastic pipe, coils or steel coils. For safety reasons, a V-frame is added to the transfer cart platform to protect the coils from falling during transport.

20 tons motorized coil transfer trolley move on railway is a kind of trackless material handling trolley. It is powered by storage battery. The battery is installed in the handling trolley.