motorized railway transfer cart

Steel coil rail transport cars are usually designed with V-decks for handling and transporting coils and drums. It is capable of handling heavy loads of up to 150 tons. Compared to other equipment such as forklifts, steel coil rail transport cars are a more cost-effective solution for transporting heavy loads in your facility. It makes your big work simple, safe and efficient. Our transfer vehicles can be customized to suit your load transport and application requirements.

The “Perfect Transfer Cart” is available in a variety of industrial transfer carts to suit the job and application. This industrial transfer trolley on rail allows clear travel to transfer loads in paint stores, quarries, warehouses and multiple workshops.

This industrial transfer trolley on rail is non-standard and designed with payloads in mind. The various parameters for considering payload include load size, point load/UDLoad, speed, length, width and height. The structure is made of IS-2062 MS structural steel and the wheels are made of alloy steel to accommodate the load and profile of the track/square bar.

The top platform can be a square bar – flat plate or a paint shop turntable or perforated plate, depending on the application.

The industrial transfer trolley on rail is powered by a cable reel, insulated shroud system and contactor power system.

Steel mill transfer trolleys are also known as unpowered trailers. Due to the high platform and high ground height of the transfer truck, the transfer truck can operate on uneven ground such as cement floor. The tires of the transfer vehicle can be solid tires or rubber tires. Large tonnage loads can be achieved. Because it has no motive. Therefore, the transfer truck needs a forklift or engine to provide power. Unpowered rail transfer vehicles can be divided into two types: running on track and running on the ground. Running on similar or identical tracks can achieve greater loads.

We offer a variety of transfer trolleys to handle metal coils and reels. The device has three basic configurations in terms of power delivery: steel coil transfer car on rails, battery-powered steel coil transfer car, and a steel coil transfer car on rails powered by cable reels. These trolleys can be designed to handle a range of coils, from small and narrow coils to heavy duty coils for high-duty applications.Steel coil transfer car on rails: The car is suitable for transporting heavy loads in high-load applications. It is also ideal for long-distance transport. The track needs to be insulated.

Rail transfer trollies are suitable for working in long-distance transportation, large and medium-sized goods transportation, lifting equipment for long-distance transportation is not specially selected, forklift load is limited, and electric rail vehicles use electromagnetic energy to display mechanical energy, so it is more environmentally friendly, and electric rail vehicles can complete automation technology, thereby saving manpower, saving is profitable.

For horizontal load transfer of a wide range of materials, we offer the heavy-duty, high-quality railway battery transfer wagon solutions you need. Use of heavy transport vehicles: transporting goods along assembly lines; transferring materials from one workstation to the next; storing and transporting production throughout shifts. They can even be used as stable but removable machine bases.

Battery powered rail cart is a rail-type transport vehicle that is widely used in steel mills, foundries, manufacturing plants, engineering and general workshops for material handling. Heavy loads on the platform are transported along the track from one station to another, depending on the actual needs. With a load capacity of up to 300 tons and customizable platform dimensions, heights, spans and control methods, it is a flexible and reliable electric transfer vehicle for heavy transport vehicles.

High quality cable drum electric railtrolley from China 50 tons mold factory electric battery, China’s leading electric rail transfer vehicle products, with strict quality control.

Material transfer equipments on rails are mounted on rails and are used to shuttle along a fixed path. Standard trolleys are DC powered. Since these are semi-custom manufactured carts, they are available in lengths and widths suitable for the application. Capacities up to 300 tons.
Material transfer equipment on rails can be designed as semi-manual or fully automatic, depending on the requirements of the application. Transfer carts can also be part of an automated crane system for moving goods, materials or products to and from manufacturing processes or storage locations.

Automated transfer cart shuttles provide reliable and efficient load transfer for a variety of applications such as aluminum anodizing, paper roll storage, and general manufacturing, and can be customized to fit. Automated transfer carts reduce labor costs, optimize manufacturing processes and reduce the capital costs associated with forklift systems. The end result is increased production and throughput.

China rail cart has the advantages of simple structure, convenient operation, convenient maintenance, large load capacity, less pollution and the like. Battery power transfer carts have always been a popular and mature material transfer equipment. It has become a new favorite in the field of global industrial transportation, and will be carried out with cranes for workshop handling and increased work efficiency. Excellent rail transfer vehicle can be used in industrial plants, ports, workshops, production lines and other transport coils, molds, steel, workpieces and so on. All solutions are designed according to the real needs of customers.

Rail guided vehicle for smaller loads, manual carts can be dedicated to specific workplace activities, such as shuttling materials. This often makes the cart easier to use. Transfer trucks are better suited to moving long loads through restrictive passages or doorways. For heavier loads, the transfer truck is an excellent affordable option due to its ability to handle heavy loads. The transfer vehicle has a compact design and is suitable for use in areas with a limited footprint. Another advantage over forklifts is how to customize the cart deck to suit a specific load.

railway traversers are cost-effective electric flat rail cars. They are electric transmission railcars powered by cables. It is a common rail electric industrial transfer rail car commonly used in workshops. The operating modes are car handle and wireless. The countertop design can be very low and can be used to move workpieces in sandblasting rooms. Industrial transfer railcars are equipped with enclosures around them, which can effectively protect the motor, reducer and other components; suitable for short-distance transportation in workshops and warehouses, with low cost and high frequency of use. It is the movement and transportation of workpieces within the workshop.

Material transfer rail car. An material transfer rail car is an electric material handling trolley made up of a cable drum mounted on the bottom of an industrial rail trolley. It is designed to transport goods or equipment from one workshop in a factory to another, from indoors to outdoors.

Railway handling cart is composed of a motor, brake, reducer, coupling, wheel pair, etc. The frame structure is composed of I-beam, channel steel, steel plate, angle steel and so on. The electrical control equipment of the electric flatbed truck is composed of a power box, a switch, a battery, and a smart charger. The track drive trolley is mainly composed of an electronic control system, a transmission system, a conductive system, a body and a wheelset. The electronic control system of the flatbed truck mainly includes: matching transformer, rotary warning light, limit switch device, etc. The transmission device of the tram is composed of a reducer, pulley, motor, brake wheel, brake, etc., which is used to drive the tram to move. The transmission is placed on the lower side of the flat car. In order to facilitate the inspection and maintenance of the flat car transmission, there are inspection holes on the countertop. The body of the railcar is made of steel structure, the table surface is plated with steel plate, and the frame is welded. The frame is made of section I-beam and steel plates welded. The flat car power supply system provides V360 AC directly through the cable reel. The cable reel is hysteretic coupling type, which ensures that the cable is evenly stressed and is not easy to damage.

Rail guided motorized vehicle, also known as electric flatbed car, electric flatbed car, flatbed car, straddle car, ground crawler, etc.. It is an in-plant rail guided motorized vehicle. First, it is a rail vehicle, need to lay the track on the ground. The track is generally an I-beam contact network; secondly, it is an electrically controlled vehicle, which runs automatically under the drive of motor reducer. Once again, it is an electric flat car with a flat bottom and no carriage cover. Special circumstances can also be non-flat but no carriage cover, the body has no steering wheel, only the front and rear direction (even if the turn depends on the track).
Rail guided motorized vehicle has the characteristics of simple structure, easy to use, large carrying capacity, not afraid of dirty, not afraid of smashing, easy maintenance, long service life, etc.. Due to its advantages of convenience, sturdiness, economy, practicality and easy cleaning, it is the first choice for short-distance fixed-point and frequent transportation of heavy loads between factories and plants.

Motorized rail transfer trolleys are a cost-effective solution that maximizes internal heavy transport and reduces fatigue. This equipment mainly travels in a straight line on the track. The length of the track can be customized.

Electric power rail flat car is the transfer cart that installs the battery to run on the track, it is the electric power rail flat car that transports the site, it is used by the combination of reliable quality material and track, the body is of reliable quality, it is composed of super capacitor, transmission, emergency brake switch, signal receiver. Simple structure, small size, easy operation, increased storage energy, not limited by distance, fast charging speed, slow discharging speed, long use time, correct positioning, realize fixed-point parking, strong carrying capacity, can carry different specifications and weight of goods, electric power rail flat car is widely used in machinery plants and metallurgical plants.

The rail transfer cart is designed to handle and transport large payloads efficiently and safely. They can handle a wide range of materials such as coils, industrial pipes, molds, heavy equipment and structural steel, commonly found in processing shops, chemical plants, warehouses, metallurgical plants, etc.

Rail transfer wagon is an electric flatbed truck that can run on steel rails. It is powered by a battery-powered system that also increases speed and efficiency to some extent. In the market, it is called electric rail flat car, electric cart, electric cart. The structure of rail-type electric flatbeds such as flatbed trucks and electric vehicles is generally composed of electrical control systems, walking systems, power supply systems, drive systems, and racks. The advantage over other devices is that it can get rid of cable control, so it can be in corners, forks, driving, and the running distance is not limited. It can be operated remotely, which is convenient to use and suitable for use on relatively long tracks. In the transportation system.

With high operational safety and flexibility, our heavy-duty rail over straddle transfer carts can be used in high temperature, high frequency of use, medium distance or long distance transport applications. The series of heavy-duty rail over straddle transfer carts use tracks instead of cables to provide power. Safer and more reliable to use. In addition, it can be transported on curved, circular or turning tracks. Its application brings great convenience to the transportation layout arrangement of the factory.

Rail road transfer vehicle is a battery-powered transfer trolley that runs on track and is used to handle various types of loads, both large and heavy, in industrial plants, construction sites, offshore platforms and ships.

Towed rail trolleys are mainly used in painting workshops, quarries, warehouses and workshops to facilitate material transportation. In addition, the product is also suitable for applications in other industries.

Rail equipment trolleys are a kind of electric railed in-plant transportation vehicles, which solve the problem of product transportation between in-plant spans, also called electric flat cars and low voltage rail flat cars.
Rail equipment trolleys are controlled by AC metallurgical motors through AC control system to start, stop, move forward and backward. It can be used in S-type track, curved track and high temperature occasions, the flat car can be equipped with hydraulic lifting system, lifting system, with security and mobility flexibility, the track laying requirements are high (need insulation treatment track), suitable for large load capacity, medium and long distance transportation occasions. Widely used in machine building and metallurgical plants, as a workshop with the crane transport heavy objects across the use.

There is a popular railway transfer bogie, popular for its low cost, environmental protection and is a good alternative to forklifts. Especially battery power, many factories are interested in it, have replaced the old material conveying equipment from different industries, such as production lines, workshops, ports, indoor, outdoor transportation, etc., not only for the company to reduce costs, but also to eliminate labor problems.

Industrial motorized rail cart. An industrial motorized rail cart is an electric material handling trolley made up of a cable drum mounted on the bottom of an industrial rail trolley. It is designed to transport goods or equipment from one workshop in a factory to another, from indoors to outdoors.

High stability rail powered transfer carts, rail trolleys allow to handle and move very heavy and large objects in a very stable, slow and safe manner. This feature is even more pronounced in versions with tracks, as the displacement of the rail powered transfer carts and cement gives great stability to the entire structure.

The railroad transfer carts is suitable for various occasions in industry (steel mills, steel structure steel pipes, steel pipes, steel billets, ladles, steel coils, etc.) from one place to another; paper roll factories: transfer paper roll painting workshop: the painting room where the workpieces are transferred to the painting room; other industries: shipbuilding, quarrying, warehouse, multi-workshop. For material transfer, electric transfer vehicles have been widely used in this field.

Electric power rail transfer cart allow very heavy objects to be moved on the ground without the need to lift them. In some cases, they are an option for transporting and handling materials and can replace other systems that use cranes or cables.

Advantages of Trackway Automated Guided Vehicle

High Security
No noise
Simple structure
Easy maintenance
Any loading capacity
Non-standard custom

Battery Powered Transfer Cart 5T for industrial, the transfer cart can be powered by battery, busbar, cable reel, or slip wire. Transfer Carts are perfect for handling tasks in industrial workshops indoors or out the door. Transfer Trolley can be customized from 1-500 tons.