rail transfer wagon

The power of the motorized railway transfer cart comes from the dragging cable, the truck obtains the AC 380V power supply from the cable, to the electrical control system, using this principle to operate the start and stop of the truck.

The rail electric cart is a motorized transport vehicle used for heavy transport in factories and workshops. The electric truck has flexible performance, simple operation, strong bearing capacity and stable operating mechanism.

Industrial rail trolley has BXC battery power supply, BDG low-voltage rail power supply, BJT cable reel power supply and BHX slip wire power supply, etc.; the track laying requirements of industrial rail trolley need to be adjusted according to the power supply and inter-plant conditions, for example: low-voltage rail power supply needs to do insulation treatment on the track; high temperature needs to do high temperature treatment, etc. Under high temperature conditions, high temperature resistant treatment is required. In addition, the customization of industrial rail trolley needs to be customized according to the specific needs of the user, and the size of the load needs to be calculated and designed by the technical staff.

Railway flat carts are battery-powered. The power supply mode can also be selected according to the needs, such as battery power supply, rail power supply, bus power supply, cable drum power supply, diesel power supply, etc. Heavy rail transfer trolley, also known as electric flat car, electric flat car, tram, crossover, electric rail car, ground climbing car, etc., is a kind of electric rail transport vehicle in the factory, first of all, it is a kind of rail-type transport vehicle, which needs to lay tracks on the ground, and the track is generally an I-shaped surface contact rail; secondly, it is an electric vehicle that drives automatically under the drive of the motor reducer. Third, the heavy rail transport trolley flat-powered industrial truck is a flat car with a flat surface and no hatch cover. In special cases, it is possible to be uneven without a hatch.

Railway handling cart is composed of a motor, brake, reducer, coupling, wheel pair, etc. The frame structure is composed of I-beam, channel steel, steel plate, angle steel and so on. The electrical control equipment of the electric flatbed truck is composed of a power box, a switch, a battery, and a smart charger. The track drive trolley is mainly composed of an electronic control system, a transmission system, a conductive system, a body and a wheelset. The electronic control system of the flatbed truck mainly includes: matching transformer, rotary warning light, limit switch device, etc. The transmission device of the tram is composed of a reducer, pulley, motor, brake wheel, brake, etc., which is used to drive the tram to move. The transmission is placed on the lower side of the flat car. In order to facilitate the inspection and maintenance of the flat car transmission, there are inspection holes on the countertop. The body of the railcar is made of steel structure, the table surface is plated with steel plate, and the frame is welded. The frame is made of section I-beam and steel plates welded. The flat car power supply system provides V360 AC directly through the cable reel. The cable reel is hysteretic coupling type, which ensures that the cable is evenly stressed and is not easy to damage.

Towed rail trolleys are mainly used in painting workshops, quarries, warehouses and workshops to facilitate material transportation. In addition, the product is also suitable for applications in other industries.

Heavy duty rail carts are mainly used to solve the problem of mobility in tight spaces. Thanks to all possible steering procedures, on one or different axles, with our heavy duty rail carts, you can achieve a true tight turning radius. The propulsion of our heavy duty rail carts can be battery-driven (for in-plant load transport) or diesel-driven (for long distances). When moving heavy equipment, the transfer vehicle will improve material handling.

The “Perfect Transfer Cart” is available in a variety of industrial transfer carts to suit the job and application. This industrial transfer trolley on rail allows clear travel to transfer loads in paint stores, quarries, warehouses and multiple workshops.

This industrial transfer trolley on rail is non-standard and designed with payloads in mind. The various parameters for considering payload include load size, point load/UDLoad, speed, length, width and height. The structure is made of IS-2062 MS structural steel and the wheels are made of alloy steel to accommodate the load and profile of the track/square bar.

The top platform can be a square bar – flat plate or a paint shop turntable or perforated plate, depending on the application.

The industrial transfer trolley on rail is powered by a cable reel, insulated shroud system and contactor power system.

Motorized rail transfer trolleys are a cost-effective solution that maximizes internal heavy transport and reduces fatigue. This equipment mainly travels in a straight line on the track. The length of the track can be customized.

We offer a variety of transfer trolleys to handle metal coils and reels. The device has three basic configurations in terms of power delivery: steel coil transfer car on rails, battery-powered steel coil transfer car, and a steel coil transfer car on rails powered by cable reels. These trolleys can be designed to handle a range of coils, from small and narrow coils to heavy duty coils for high-duty applications.Steel coil transfer car on rails: The car is suitable for transporting heavy loads in high-load applications. It is also ideal for long-distance transport. The track needs to be insulated.

The industrial transfer cart is a flat car with a flat surface and no hatch cover. In special cases, it can be non-flat and without hatch cover. This kind of car has the characteristics of simple structure, easy to use, large carrying capacity, no dirty and no fight, easy maintenance, long service life, etc. Because of its convenience, lightness, economy, practicality, easy to clean and many other advantages, it has become the first choice for the transportation of frequent loads at short distance fixed points within the enterprise and between the factory and the plant.

China rail cart has the advantages of simple structure, convenient operation, convenient maintenance, large load capacity, less pollution and the like. Battery power transfer carts have always been a popular and mature material transfer equipment. It has become a new favorite in the field of global industrial transportation, and will be carried out with cranes for workshop handling and increased work efficiency. Excellent rail transfer vehicle can be used in industrial plants, ports, workshops, production lines and other transport coils, molds, steel, workpieces and so on. All solutions are designed according to the real needs of customers.

Rail battery electric flatbed cart, also known as rail transfer cart, electric rail transfer trolley, transfer cart for workshop, is a kind of factory rail electric handling vehicle, first of all it is a rail type transport vehicle, need to lay the track on the ground, the track is generally I-beam surface contact track; secondly it is an electrically driven vehicle, in the motor reducer drive under the automatic operation.
Again it is a kind of flat car, table flat without compartment cover, special circumstances can also be non-flat but no compartment cover, car body without steering wheel only forward and backward direction (even if the turn has to rely on the track to turn). This kind of vehicle has a simple structure, easy to use, large load-bearing capacity, not afraid of dirty and not afraid of smashing, easy maintenance, long service life, etc., because of its convenience, strong, economic, practical, easy to clean up and many other advantages, become the first choice of transportation tools for enterprise plant internal and plant and plant and plant between the short distance fixed point frequently carry heavy things.

Electric rail traverser is an electrically driven, heavy-duty turntable bridge designed to flip rail rolling stock in railway workshops and railway terminals, with limited space for the necessary return tracks. The function of the traverser is to move the locomotive and/or wagon from one track to another next or opposite. The locomotive track crosser is 25 meters long and has a load of 200 tons.

Rail trolley for warehouse plays an important role in transportation in industrial plants and improves the efficiency of industry.
Rail trolley for warehouse is controlled by AC system, which makes the trolley start, stop, forward and backward. The flat car can be equipped with hydraulic lifting system and lifting system, with safety and motorized flexibility, high requirements for track laying, suitable for large load capacity, medium and long distance transportation occasions, suitable for high frequency factory transportation, as a collaborative tool with heavy transport in the workshop.

Motorized rail truck is an electrically driven material handling and transfer vehicle designed for material handling in the industrial sector. This highly efficient 460VAC screw drive can be equipped with a smooth deck or bracket and is equipped with warning lights, buzzers, protective skirting boards and heavy-duty reels. Standard or special gauges are available. We are committed to developing new products and improving existing product lines. The movement of molds, coils, blanks and other large heavy loads between cranes may require expensive and extensive installation work, which will still result in a limited operating area.

Rail transfer wagon is an electric flatbed truck that can run on steel rails. It is powered by a battery-powered system that also increases speed and efficiency to some extent. In the market, it is called electric rail flat car, electric cart, electric cart. The structure of rail-type electric flatbeds such as flatbed trucks and electric vehicles is generally composed of electrical control systems, walking systems, power supply systems, drive systems, and racks. The advantage over other devices is that it can get rid of cable control, so it can be in corners, forks, driving, and the running distance is not limited. It can be operated remotely, which is convenient to use and suitable for use on relatively long tracks. In the transportation system.

High quality cable drum electric railtrolley from China 50 tons mold factory electric battery, China’s leading electric rail transfer vehicle products, with strict quality control.

Rail transfer ladle car is a type of rail transfer vehicle used to transport specific high-temperature ladles. Due to high temperature and safety, the body material, transmission system requirements, electrical control requirements, etc. of the translation vehicle.

Electric power rail flat car is the transfer cart that installs the battery to run on the track, it is the electric power rail flat car that transports the site, it is used by the combination of reliable quality material and track, the body is of reliable quality, it is composed of super capacitor, transmission, emergency brake switch, signal receiver. Simple structure, small size, easy operation, increased storage energy, not limited by distance, fast charging speed, slow discharging speed, long use time, correct positioning, realize fixed-point parking, strong carrying capacity, can carry different specifications and weight of goods, electric power rail flat car is widely used in machinery plants and metallurgical plants.

rail handling Carts are perfect for narrow spaces.The rail handling cart can work in low-height spaces, as they do not require aerial elements or suspended elements when moving on the ground. That makes them safer to operate.

Rail guided motorized vehicle, also known as electric flatbed car, electric flatbed car, flatbed car, straddle car, ground crawler, etc.. It is an in-plant rail guided motorized vehicle. First, it is a rail vehicle, need to lay the track on the ground. The track is generally an I-beam contact network; secondly, it is an electrically controlled vehicle, which runs automatically under the drive of motor reducer. Once again, it is an electric flat car with a flat bottom and no carriage cover. Special circumstances can also be non-flat but no carriage cover, the body has no steering wheel, only the front and rear direction (even if the turn depends on the track).
Rail guided motorized vehicle has the characteristics of simple structure, easy to use, large carrying capacity, not afraid of dirty, not afraid of smashing, easy maintenance, long service life, etc.. Due to its advantages of convenience, sturdiness, economy, practicality and easy cleaning, it is the first choice for short-distance fixed-point and frequent transportation of heavy loads between factories and plants.

Rail transfer trolleys are used for transport. A rail transfer trolley is a rail-type transport vehicle that is widely used in the handling of materials in steel mills, foundries, manufacturing plants, engineering and general workshops. It runs along the track according to actual needs, transporting heavy loads on the platform from one place to another. The weight of the pallet vehicle is 300 tons, and the size, height, span and control mode of the platform can be customized. It is a flexible and reliable heavy-duty transport vehicle.

There is a popular railway transfer bogie, popular for its low cost, environmental protection and is a good alternative to forklifts. Especially battery power, many factories are interested in it, have replaced the old material conveying equipment from different industries, such as production lines, workshops, ports, indoor, outdoor transportation, etc., not only for the company to reduce costs, but also to eliminate labor problems.

railway traversers are cost-effective electric flat rail cars. They are electric transmission railcars powered by cables. It is a common rail electric industrial transfer rail car commonly used in workshops. The operating modes are car handle and wireless. The countertop design can be very low and can be used to move workpieces in sandblasting rooms. Industrial transfer railcars are equipped with enclosures around them, which can effectively protect the motor, reducer and other components; suitable for short-distance transportation in workshops and warehouses, with low cost and high frequency of use. It is the movement and transportation of workpieces within the workshop.

Rail Cart Handling Material for Heavy Material Handling Solutions The rail cart handling material is powered by a towed cable that is always placed in the middle of the track. When the transfer station is running, the external power supply is directly transferred to the motor of the electric rail transfer station by dragging the cable. If necessary, a towing cable can be selected to protect the cable from wear.

Rail road transfer vehicle is a battery-powered transfer trolley that runs on track and is used to handle various types of loads, both large and heavy, in industrial plants, construction sites, offshore platforms and ships.

Material transfer equipments on rails are mounted on rails and are used to shuttle along a fixed path. Standard trolleys are DC powered. Since these are semi-custom manufactured carts, they are available in lengths and widths suitable for the application. Capacities up to 300 tons.
Material transfer equipment on rails can be designed as semi-manual or fully automatic, depending on the requirements of the application. Transfer carts can also be part of an automated crane system for moving goods, materials or products to and from manufacturing processes or storage locations.

Automated transfer cart shuttles provide reliable and efficient load transfer for a variety of applications such as aluminum anodizing, paper roll storage, and general manufacturing, and can be customized to fit. Automated transfer carts reduce labor costs, optimize manufacturing processes and reduce the capital costs associated with forklift systems. The end result is increased production and throughput.

Our range of rail traveling transfer cart is designed and manufactured to meet the needs of a wide range of industries such as steel, aluminium, automotive, heavy duty manufacturing and more. These material transport vehicles are designed to run on floor-mounted tracks for transporting heavy materials in areas where crane carriers or bridge cranes do not provide services

Material transfer rail car. An material transfer rail car is an electric material handling trolley made up of a cable drum mounted on the bottom of an industrial rail trolley. It is designed to transport goods or equipment from one workshop in a factory to another, from indoors to outdoors.