trackless transfer cart for marble slab transport 30 tons

The 16t customized steel coil transfer cart is a special steel coil transfer trolley equipped with V-shaped brackets and roller brackets to prevent the steel coils from rolling and falling off. At the same time, the roller bracket can adjust the distance according to the diameter of the coil. The V-shaped frame and the roller frame are connected to the car body and can be disassembled at any time to facilitate the transportation of other materials. We can design according to the working conditions of the workshop, the size and weight of the material, and the coil conveying trolley can be used in various occasions and harsh environments.

These trackless transfer cart with emergency stop 1-500 tons 90 m and 40 m heavy roller conveyors for steel mills were conceived and built to achieve maximum working flexibility. Because they do not have a predetermined path, they can be turned in any direction, moving on any type of floor. These trackless transfer cart with emergency stop 1-500 tons are very useful for transporting heavy loads to places that are not accessible by cranes.

Trackless transfer cart with flat deck 120 ton electrical engineering control system consists of: control power switch, DC transformer machine equipment, warning light, conductive transfer device, the key effect is to produce the working voltage necessary for the operation of the electric flat deck.
The difference between the Trackless transfer cart with flat deck 120 ton and the hydraulic lift rail trolley is whether it runs on rails or not. The hydraulic lift rail car can turn on the track, but not as much as the trackless transfer cart with flat deck 120 ton moves on the ground. trackless transfer cart with flat deck 120 ton does not need to consider the track laying requirements, the cost of the track and the costs. The trackless transfer cart with flat deck 120 ton has no running route and is more friendly to road conditions. It can run on concrete figure ground, tempered ground, etc. It can achieve 360 degrees and also has a certain climbing ability depending on traction power.
Trackless transfer cart with flat deck 120 ton key has transmission manipulation device, electric engineering manipulation device, cart wheel, window frame composition.
Trackless transfer cart with flat deck 120 ton transmission control system consists of motor, reducer, roller drive belt, braking device and brake control board, the key effect is to drive the electric flat car on the track forward glide.

Trackless transfer cart for steel 25t adopts solid cast steel covered rubber wheels, Trackless transfer cart for steel 25t is customized with large load capacity without track, requiring high ground level and bearing capacity, and the direction of guidance by the steering wheel can be freely turned. Battery life is limited, there is a requirement for working time, suitable for the use of infrequent work occasions.

Product structure:
The battery flat car is composed of driving part, walking structure and control system, 80t trackless transfer car parameters, all are modular composition, simple and convenient maintenance and replacement

Product parts:
DC motor: brush motor, high torque, can be used in the use of high frequency occasions.
Brake: The brake can be divided into electromagnetic brake and holding brake, which is the common brake.
Remote control:The remote control can choose rocker control, which controls the turning direction of the flat car through the direction of the rocker.

Perfect Transfer Cart is designed for bulk materials, fixed-point transportation, repeated transfer, off-site transfer and other complicated loading and unloading, as well as steering flexibility, loading and unloading, transport, hidden dangers, productivity, etc. The special electric rail flat car, flat trailer, non-powered tractor, the transfer efficiency, labor intensity, sex, is the current transfer vehicles, a very cost-effective product.
Trackless transfer cart customized size 80 tons, is a battery-powered, motor-driven transport tool for pulling goods or people. Ltd. is a company dedicated to the research and development, design, production and sales of the transport industry, the company’s annual production capacity of electric flatbed truck is strong, can produce a variety of tonnage between 1-300 tons BDG low-voltage rail type, BJT cable reel type, BHX slip wire type, BXC battery type, BTL tow cable type, BP non-powered, BWP trackless transport, BQX cable type, BQC battery type. The BDG low-voltage rail-powered electric flat car is divided into BDGS and BDGZ low-voltage rail-powered electric flat car series according to the load tonnage and power transmission source.

Trackless transfer cart with v frame 6t takes lead-acid battery as energy source, control module as control core; motor as original power; handle and remote control as input means; steering wheel to guide the direction and fixed wheel to carry the weight together; reducer to amplify the torque and provide power to fixed wheel; LED alarm as working and warning sign With the intelligent charger as the external power input: With the above functions, the trackless transfer cart with v frame 6t working capacity is formed together.

Transfer cars move products from one place lane to another and can be either manual or automatic. And this video will be shown our automatic transfer car capacity of 10 tons, Transfer cars can travel long distances and may be more cost-effective than chain transfer. It can achieve 360 degrees of flexible turning, forward, backward, left and right rotation, speed regulation, emergency stop, and safety warning lights, It has simple functions and smoothes running. the operation is small and is not restricted by any space environment, It is widely used in various industries.

Trackless transfer cart for sale 1-300 t in the case of no external power supply, external power to run freely, mainly through the hydraulic oil pressure transmission so as to achieve the function of lifting, can make the aerial work a greater range, higher efficiency. Hydraulic lifting railcar is not subject to lifting, easy to operate, lifting freely, the height can be designed according to the size provided by the user. Its rated capacity is between 0-80T; power supply is available in BTLto cable-powered type, BDG low-voltage rail-powered type, BXC battery-powered type and BJT cable reel-powered type; running speed is 0-20 meters per minute; control by handle or wireless remote control is optional.
Trackless transfer cart for sale 1-300 t can realize fully automatic AGV handling, which can free up manpower and hands. This large-tonnage handling vehicle has the advantages of coming and going, in situ 360 degrees, etc. Not only that, because the goods are heavy, the large tonnage workshop handling trolley has the function of locking and unlocking when the trolley is running and stopped, and the trolley can only run after unlocking to prevent the hidden problems that exist under the accident. Perfect Transfer Cart’s trolley can also be installed with magnetic stripe navigation, and the trolley can be made explosion-proof and high temperature resistant according to the working conditions.

The main application of trackless transfer cart for outdoor and indoor operation 200t;trackless transfer cart for outdoor and indoor operation 200ts for brick factories, kiln factories, refractory factories, ceramic factories and roasting factories;Electric transport vehicles for engineering, tunnel and sanitation, electric dump trucks, electric sanitation clearing vehicles, etc.Electric transport vehicles and electric dump trucks are also used in flour mills, mineral processing plants, foundry mills, chemical plants, furnace materials factories, farms and so on.

Trackless transfer cart for warehouses 5 tons is mainly applied with dynamic lifting and transporting water billet car, etc.; electric kiln loading cart and electric kiln discharging cart for brick factory, kiln factory, refractory factory, ceramic factory, roasting factory, etc.; electric transportation cart for engineering, tunnel, sanitation, electric tipping cart, electric sanitation cleaning cart, etc. Electric transporters and electric dumpers are also used in flour mills, mineral processing plants, foundries, chemical plants, furnace plants, farms, etc.

Trackless transfer cart customized color 120t is suitable for 24V, 36V, 48V, 72V, 110VDC (AC) power supply, the battery is installed in the flat car, through the electronic control system to supply power to the motor, so that the flat car start, stop, backward, 72V, direct power supply. Compared with the railed flat car, this series of flat car has the advantages of safety, flexibility, simple structure, easy to use and maintain, large load capacity, low noise, beautiful appearance, etc. It has the characteristics of safety, flexibility, safety, high efficiency, safety and environmental protection. It is used in machinery manufacturing plants, warehouses, metallurgical plants as workshop transportation or crane transportation to transport heavy objects. For example: moulds, raw materials, castings and forgings, riveted and welded parts, processed workpieces and finished products are transported, and it is the first choice for industrial AC power or long-distance transportation. It meets the technical requirements of JB/T6127 electric flat car.
Trackless transfer cart customized color 120t can not only meet the most basic transportation requirements, but also can add hydraulic lifting system according to user needs, to achieve the table lift, side flip and other functions.
Trackless transfer cart customized color 120t is operated by motor through the reducer to drive the smooth running of the flat car, running speed generally 0 ~ 20m / min. wired and wireless remote control operation. The frame adopts box beam steel or section steel welded structure.

Trackless transfer carts for merchandise 200t are designed to transport heavy goods or equipment from one workshop in a factory to another. It can be used indoors or outdoors. It mainly includes frames, brushless DC motors, reducers, wheels, batteries, chargers, etc., including metallurgy, casting, new plant construction and shipbuilding. We come in different styles and standard capacities, up to 300 tons, and we have the solutions you need, each style can be designed for your specific application.

Trackless transfer cart for precise pipe industry 120t is equipped with detachable fixed piles at four corners to ensure that the special flat cart will not slip due to emergency stop during driving, the cart will not slide or tilt when it is stationary on the uphill, the tonnage and size of the cart can be customized according to your needs, the body structure is sturdy, high-grade atmosphere, strong climbing ability, the installation of emergency power-off switch, automatic stop when encountering people and objects, applied to factories, open-air operations, and places with slope.
Perfect Transfer Cart follows the whole process of design, production, finished product, inspection and shipment from the perspective of product practicality, and carries out two inspections in drawing confirmation, material placement, jointing and installation, painting, inspection and loading, and makes gradual improvement by combining the inconvenience in the actual production and use process and the problems in the long-term use process of customers.

Trackless transfer cart long service life 10 ton is easy to operate, with the assistance of the track, only with the control of the flat car in and out, there is a trackless vehicle relative to the track car, trackless that is no track, trackless transfer cart long service life 10 ton operation Relying on manual manipulation, the direction and route of operation also by manual control, manipulation operation is relatively difficult, but after familiar with the operation, trackless car can be turned at the origin, and not limited by the rail car and slip wire, this car can reach any place.

Trackless transfer cart for the transport of coils 80t table size and tonnage can be customized according to the size of steel structures such as steel sections and coils, and the turning is light and flexible, which is convenient for the round-trip transfer between the production workshop and the storage place, and the protective fence and radar detection device will be added around the cart to ensure the safe and barrier-free operation of the cart.
Trackless transfer cart for the transport of coils 80t In the transfer of heavy mold products, more use trackless flat car, the series of flat car with its own flexible rotation, space-saving, large load-bearing capacity, safety and reliability and other advantages to get a lot of ke favor. It is used to transfer coils to and from the mold workshop and the working workshop, and the rubber mats are laid on the table to prevent the mold from moving.

Trackless transfer cart for marble slab transport 30 tons is used for multiple workshops across the transport, which is more convenient than the rail flat car and can greatly improve the work efficiency. With the customer’s demand as the service concept, the electric flat car is manufactured by heart, continuous improvement, strong design team independent research and development design to overcome technical problems, Trackless transfer cart for marble slab transport 30 tons is successfully put into use on a trial basis, Trackless transfer cart for marble slab transport 30 tons The trackless transfer cart for marble slab transport 30 tons is divided into rubber wheel electric leveling cart and pneumatic wheel electric leveling cart according to the different tires, which are widely used in the fields of automobile production, shipbuilding, mold stamping, steel blending, and the transportation and assembly of large machines and equipment.

Trackless transfer cart for polyester strapping 25 ton is a frame structure with four longitudinal beams and a number of crossbeams and paving plates welded together, usually using large channel steel as the longitudinal and crossbeams of the frame, taking eight points to carry the load, the frame is evenly stressed. The flat bearing seat on the wheel pair is connected with the frame through bolts, and this structure effectively reduces the height of the table.
The reducer of the transmission device is placed at one end of the flat car for holding the shaft, which is convenient for assembly maintenance and modification.
Trackless transfer cart for polyester strapping 25 ton is equipped with a connecting hook at the front and rear, which can pull other flat car or be pulled when necessary. Both sides of the flat car are equipped with lifting holes for easy lifting.

The trackless transfer cart with weighing scale 200t is battery-powered. The battery is installed in the trolley. The battery is powered by an electronic control system to the DC motor. We use this principle to operate the car, for example, starting, stopping, moving forward and backward, adjusting the speed, etc. Trackless transfer cart with weighing scale 200ts can be used for both ‘S’ and arc railways.

Trackless transfer cart with warning alarm 50 ton solid tire type electric leveling cart 50 ton trackless mold transfer cart The series of trackless electric leveling cart is a kind of manned electric transportation equipment. This series of handling trolley has safety protection as well as various shifting load functions of transport trolley, with lead-acid battery or lithium battery as energy source, DC motor speed control drive technology, multi-wheel hydraulic steering technology and dual operation modes of wire control and remote control, so that the flat trolley can realize the functions of start, stop, forward, backward, turn, etc. It is used to transport and move molds, coils, blanks and other large and heavy loads. “Trackless transfer cart with warning alarm 50 ton”, it is safe, efficient and ideally suited for transporting molds, coils and other heavy loads throughout production plants and facilities.

Battery Powered Transfer Cart With Robot Arm is used in the assembly line for positional working, The plc system is interesting in the transfer cart to realize automated stop when moving on a station. The transfer platform of the cart can be customized with additional devices to meet the handling needs of different handling situations.

Trackless transfer cart iso certified 1-500t with lead-acid battery as energy source, control module as control core, operation handle and remote control as input means, load cargo on the table, steering wheel to guide the direction and and fixed wheel to jointly carry the weight, motor to provide the original power, reducer to amplify the torque and provide to Fixed wheel power, LED sound and light alarm as work and warning signs, and intelligent charger as external power input. With the above functions, together the trackless transfer cart iso certificated 1-500t has the ability to work. In addition to the advantages of easy operation, large starting torque, smooth driving and silent steering, the trackless transfer cart iso certified 1-500t also has the advantage of its structure, it is not constrained by the track and can be steered left and right in a flat field, which is easy to use.

Trackless transfer cart for steel liquid 30 ton drive wheels and load wheels can choose high strength polyurethane rubber solid tires or pneumatic tires, get rid of the dependence of trackless transfer cart on the ground track, do not destroy the infrastructure, can walk on the ground at will, turn at will without space and ground restrictions, can change the direction of travel and route at any time, very suitable for use in the site of the running route is not fixed.
1、Trackless transfer cart for steel liquid 30 ton adopts crane beam type box structure, CNC cutting of steel plate and intelligent robot welding.
2、The wheels are made of solid cast steel with polyurethane rubber, which can reduce the height of the whole car and ensure the stability of operation.
3、Trackless transfer cart for steel liquid 30 ton adopts balance beam or will install support to assist its flexible turning.
4、Trackless transfer cart for steel liquid 30 ton adopts double drive to increase the power of the dolly when running.
5、Trackless transfer cart for steel liquid 30 ton adopts dual control with the handle and wireless remote control, and the handle is equipped with a directional rocker, which makes the control more convenient and flexible.
6、The table surface can be equipped with anti-slip rubber plate or wooden plate to protect the safety of the workpiece and prevent the workpiece from contacting with the car body directly to cause damage to the workpiece.

Trackless transfer cart with scissor lift 400 ton is to be composed of power supply, drive mechanism, steel load bearing frame, steering, travel mechanism, control module and fault diagnosis module. You can choose battery, discharge motor or cable as the power supply of the trackless electric flat car. The series of flat cars are equipped with warning and detecting devices, which immediately issue alarms and automatically stop when encountering objects, and the cars are equipped with automatic intelligent chargers.
1. The choice of battery as the power source can make the cost lower and easier.
2. Can also be installed according to user needs positioning device, device, lifting platform and other auxiliary devices, can be equipped with PLC, to achieve fully automated control.
3. Can be customized according to user needs for frequency conversion start, anti-rollover, lift, wifi wireless communication, scanning, fixed-point stop, waterproof treatment, ultra-low table, climbing and other functional customization. Hydraulic lift railcar runs freely without external power supply and external power, mainly through the pressure transmission of hydraulic oil so as to achieve the function of lifting and lowering, which can make the aerial operation range larger and more efficient.
Trackless transfer cart with scissor lift 400 ton is rated between 0-400T; power supply is available in four types: BTL cable-powered, BDG low-voltage rail-powered, BXC battery-powered and BJT cable reel-powered; running speed is 0-20 meters per minute; handle or wireless remote control is optional. remote control for control.

Trackless transfer cart for the transport of coils 30 ton, is my company’s low-voltage rail power supply flat car, low-voltage rail flat car is the use of voltage regulator to lower the electricity to the human body voltage 36v to the track, so that even if the personnel touched the track will not be an accident, and then through the wheels to take electricity to the body of the voltage booster This is the simple principle of low-voltage track. Trackless transfer cart for the transport of coils 30 ton is suitable for long-distance, harsh, transport situation work, save the battery and charging time, can 24 hours of non-stop operation, but for the track laying requirements are high, it is recommended that the new plant construction when put into the track laying, the track to do insulation treatment. Can be a lot of unnecessary trouble, trackless transfer cart for the transport of coils 30 ton is recommended for customers who need to weigh more than 5 tons (T) to choose. Small tonnage is still recommended to use the battery power supply is more convenient and comfortable.

Trackless transfer cart with ac motor 1-500 t has seven main technical parameters: power supply mode, load tonnage, table size, table height, track length, track spacing, and operation mode, among which the main technical parameters are power supply mode and load tonnage.

Product function

1、Transportation: Trackless transfer cart with flat deck 75t is a product designed for transportation, so the primary function is transportation.
2、Turning: Trackless transfer cart with flat deck 75t is equipped with steering wheels and steering control, so the control of turning is one of its main functions.
3、Lifting: Trackless transfer cart with flat deck 75t can be added with hydraulic and mechanical lifting devices according to customers’ needs, so that the lifting function can be achieved on the basis of the original one.
4、Side-turning: Trackless transfer cart with flat deck 75t can be added with hydraulic and mechanical side-turning devices according to customers’ needs to achieve the side-turning function on the original basis.
5、Table rolling: Trackless transfer cart with flat deck 75t can add rollers, rollers and other devices according to customers’ needs to achieve the function of turning cylindrical workpieces and smoothly moving flat workpieces on the original basis.
6、Other functions: The company can customize and develop the functions required by customers.

Trackless transfer cart with steel rail wheels 50t is composed of forward, backward, in-situ rotation, eight turn, swing head, swing tail, etc.; drive system, touch electric control system, box beam type frame the system are selected from international famous suppliers products to ensure that the whole vehicle reliable and stable performance, lift, table rotation, side flip, etc.. Trackless transfer cart with steel rail wheels 50t adopts the main components as standard parts common parts.
Working precautions.
1, in order to ensure the normal operation of the Trackless transfer cart with steel rail wheels 50t, the voltmeter and power meter indication on the ground power cabinet should be guaranteed normal. In general, slightly higher than 36v voltage belongs to the normal voltage. Ammeter indication is smaller belongs to the normal situation, but to ensure that the ammeter indication is normal without swing.
2. When loading goods with electric flat car, keep the balance of the center of gravity of the electric flat car. It is best to place the goods separately from the middle to both sides, and unload the goods at both ends first, and then unload the middle, so that the balance of the electric flat car can be effectively maintained for better work.
3、Trackless transfer cart with steel rail wheels 50t conductive surface needs to be cleaned and polished regularly to ensure that the conductive surface is normal. If there is oil, rust, dust and other insulators on the conductive surface of the electric flat car, it may cause abnormalities when conducting electricity, so that the machine can not be properly energized, thus affecting the normal work.

When we are moving goods, due to space limitation, we need trackless transfer cart for steel shop 200t with low platform, but some customers will have some doubts whether the low platform will affect the operation.
Trackless transfer cart for steel shop 200t has the advantages of no need to lay foundation and track, free turning and unrestricted running distance compared with rail flat car, and rubber wheel car (with car wheels) used by other companies, when we design the low platform flat car, we will pay attention to this aspect of the car power shortage, if the slope, we set the ground clearance according to the slope, with the advantages of low platform, high safety, easy operation, etc.
The low table trackless transfer cart for steel shop 200t will not affect the driving, and save space, our company this car technology has matured, according to the workplace restrictions design electric flat car, we from product planning, equipment selection, transportation and distribution, installation and training to post-sale, to provide you with a worry-free service experience.

Trackless transfer cart for marble slab transport 30 ton Product features.
1) The biggest difference with the rail flat car is that the operation is not limited by the track track, and can turn and run freely.

2）It can adapt to the fallen road surface inside and outside the plant. It can also run on slightly undulating road surface.

3）Supporting various operation modes, realizing straight running, traverse, turning, inclined running and in-situ rotation, etc.

4）Simple operation, easy to get started, only need simple training can be skilled in using the flat car.

5）Battery power supply, clean and energy-saving, no pollution.

6）Good safety, with the function of stopping when encountering obstacles, it can automatically decelerate and stop when sensing obstacles.

7）It can realize automatic operation, support path tracking, support remote control, and can reserve the upper computer interface. Provide communication protocol.

Trend of Trackless transfer cart with lifting arm 400 ton: With Trackless transfer cart with lifting arm 400 ton, customers can save all the costs of laying tracks and save the valuable space taken up by laying tracks. There is another advantage that customers can use it after unloading the car after purchase.