trackless transfer cart for precise pipe industry 120t

Trackless transfer cart with emergency stop 120 tons is an electric flatbed truck without special tracks, mainly through the battery for power supply, and is equipped with maintenance-free batteries, which can reduce the daily maintenance of the flatbed truck. emergency stop 120 tons without cable
And fixed running track, able to turn freely, and after special design configuration turning radius is relatively small, even to achieve in situ turning, turning process is also particularly flexible, the layout of the surrounding operating area restrictions are even smaller. Can be adjusted for uneven ground.
Because of its obvious advantages, the Trackless transfer cart with emergency stop 120 tons will have greater development in the future in factory workshops and other places where transportation is needed.

Trackless transfer cart for marble slab transport 30 ton Product features.
1) The biggest difference with the rail flat car is that the operation is not limited by the track track, and can turn and run freely.

2）It can adapt to the fallen road surface inside and outside the plant. It can also run on slightly undulating road surface.

3）Supporting various operation modes, realizing straight running, traverse, turning, inclined running and in-situ rotation, etc.

4）Simple operation, easy to get started, only need simple training can be skilled in using the flat car.

5）Battery power supply, clean and energy-saving, no pollution.

6）Good safety, with the function of stopping when encountering obstacles, it can automatically decelerate and stop when sensing obstacles.

7）It can realize automatic operation, support path tracking, support remote control, and can reserve the upper computer interface. Provide communication protocol.

Trend of Trackless transfer cart with lifting arm 400 ton: With Trackless transfer cart with lifting arm 400 ton, customers can save all the costs of laying tracks and save the valuable space taken up by laying tracks. There is another advantage that customers can use it after unloading the car after purchase.

Trackless transfer cart for steel liquid 30 ton drive wheels and load wheels can choose high strength polyurethane rubber solid tires or pneumatic tires, get rid of the dependence of trackless transfer cart on the ground track, do not destroy the infrastructure, can walk on the ground at will, turn at will without space and ground restrictions, can change the direction of travel and route at any time, very suitable for use in the site of the running route is not fixed.
1、Trackless transfer cart for steel liquid 30 ton adopts crane beam type box structure, CNC cutting of steel plate and intelligent robot welding.
2、The wheels are made of solid cast steel with polyurethane rubber, which can reduce the height of the whole car and ensure the stability of operation.
3、Trackless transfer cart for steel liquid 30 ton adopts balance beam or will install support to assist its flexible turning.
4、Trackless transfer cart for steel liquid 30 ton adopts double drive to increase the power of the dolly when running.
5、Trackless transfer cart for steel liquid 30 ton adopts dual control with the handle and wireless remote control, and the handle is equipped with a directional rocker, which makes the control more convenient and flexible.
6、The table surface can be equipped with anti-slip rubber plate or wooden plate to protect the safety of the workpiece and prevent the workpiece from contacting with the car body directly to cause damage to the workpiece.

Trackless transfer cart for metallurgy plant 30 ton adopts box beam structure with high load factor. The whole cart adopts the organic welding of steel plate and profile, with compact structure and generous appearance. The orderly arrangement of ribs ensures the pressure-bearing capacity of the table and is not easily deformed.

Multi-drive transfer cart heavy load transportation designed to move loads up to 1500 tons. with multiple drive-powered types, the Multi-Drive Flatbed Transporter makes moving heavy loads across a facility easy and automated. The video has been shown 8 different transfer cart for industrial use, such as rail transfer cart for industrial production lines, anti-high temperature ladle trackless transfer cart, double rail transfer cart transportation in parallel, universal wheel trackless transfer cart, straight and ”S” paths are available for trackless transfer torrey, hydraulic lifting table transfer car. We can also provide customized services, you can show your needs(load capacity, material dimension, local voltage, etc.)

Trackless transfer cart for the transport of coils 80t table size and tonnage can be customized according to the size of steel structures such as steel sections and coils, and the turning is light and flexible, which is convenient for the round-trip transfer between the production workshop and the storage place, and the protective fence and radar detection device will be added around the cart to ensure the safe and barrier-free operation of the cart.
Trackless transfer cart for the transport of coils 80t In the transfer of heavy mold products, more use trackless flat car, the series of flat car with its own flexible rotation, space-saving, large load-bearing capacity, safety and reliability and other advantages to get a lot of ke favor. It is used to transfer coils to and from the mold workshop and the working workshop, and the rubber mats are laid on the table to prevent the mold from moving.

Trackless transfer cart for sale 200t, as the name implies, does not need to transfer pieces, loading and other workpieces, is a special type of electric flat car, mainly using polyurethane covered rubber wheels. As a factory and workshop crossover, trackless rubber wheel electric flat car can not only go straight, but also turn and walk, which greatly improves the convenience of regional transportation and solves the trouble of many enterprises in transporting goods in different directions.
Trackless transfer cart for sale 200t As a kind of handling equipment in industrial workshops, different styles of trackless electric flat carts solve the transportation work of various workshops and plants.

The transportation of material workpieces within the handling car, more and more manufacturers use electric flat car to complete, the following we introduce the characteristics of the trackless electric flat car.
Compared with the rail flat car, Trackless transfer cart for sale 200t gets rid of the dependence on the rail and realizes the flexibility and freedom of mobile operation. It is used for conveying materials at factory sites and workshops, which is faster and more convenient, saving time and reducing costs.

The trackless transfer cart with warning horn 50t can be driven without fuel, which is not available in any fuel vehicle. This feature is not only suitable for in-plant but also for short-distance transportation, the main features are as follows.
1、Environmental protection and energy saving, low running cost.
2、Low investment and high return rate.
3, high performance, with high-tech sustainable development of great potential.
At present, Trackless transfer cart with warning horn 50t is widely used in automobile production, shipbuilding, mold stamping, mining transportation, steel deployment, large machinery and equipment delivery and assembly, etc.

Trackless transfer cart with custom frames/racks 120 tons internal system works reliably, with high quality configuration parts such as reducer, motor, bearing, etc., strong structure, long service life, can be designed according to customer’s requirements. trackless transfer cart with custom The surface of frames/racks 120 tons is sandblasted and coated with three layers of high-strength anti-rust paint and two layers of top coat, which meets the requirements of environmental regulations. Technical standard of electrical system: the electrical components are made of mature products of international famous brands, the protection level of electric control box is not less than IP54, and all wiring is connected with aviation plug type simple connection, which is easy to install and maintain. Our Trackless transfer cart with custom frames/racks 120 tons is designed with welding sequence and overall grinding and correction process according to its structural characteristics, and the welding process is fixed and welded under the platform and welding fixture to ensure the shape is free of skew and has sufficient load-bearing capacity and anti-deformation capability.

Perfect Transfer Cart is designed for bulk materials, fixed-point transportation, repeated transfer, off-site transfer and other complicated loading and unloading, as well as steering flexibility, loading and unloading, transport, hidden dangers, productivity, etc. The special electric rail flat car, flat trailer, non-powered tractor, the transfer efficiency, labor intensity, sex, is the current transfer vehicles, a very cost-effective product.
Trackless transfer cart customized size 80 tons, is a battery-powered, motor-driven transport tool for pulling goods or people. Ltd. is a company dedicated to the research and development, design, production and sales of the transport industry, the company’s annual production capacity of electric flatbed truck is strong, can produce a variety of tonnage between 1-300 tons BDG low-voltage rail type, BJT cable reel type, BHX slip wire type, BXC battery type, BTL tow cable type, BP non-powered, BWP trackless transport, BQX cable type, BQC battery type. The BDG low-voltage rail-powered electric flat car is divided into BDGS and BDGZ low-voltage rail-powered electric flat car series according to the load tonnage and power transmission source.

Trackless transfer cart iso certified 1-500t with lead-acid battery as energy source, control module as control core, operation handle and remote control as input means, load cargo on the table, steering wheel to guide the direction and and fixed wheel to jointly carry the weight, motor to provide the original power, reducer to amplify the torque and provide to Fixed wheel power, LED sound and light alarm as work and warning signs, and intelligent charger as external power input. With the above functions, together the trackless transfer cart iso certificated 1-500t has the ability to work. In addition to the advantages of easy operation, large starting torque, smooth driving and silent steering, the trackless transfer cart iso certified 1-500t also has the advantage of its structure, it is not constrained by the track and can be steered left and right in a flat field, which is easy to use.

Trackless transfer cart for warehouse handling 120t is mostly used in metallurgical industry when transferring metal ladles such as steel ladle, slag ladle, iron ladle, etc. The temperature of the outer surface of the ladle body is more than 200-300°C. Therefore, it is necessary to do heat insulation protection for electrical parts.
300 ° C or even, so the need to do thermal protection of electrical components, the dolly more laying refractory bricks insulation.
Trackless transfer cart for warehouse handling 120t can be used for lathe processing enterprises, the transport of different specifications of machine tools, can be in the machine tool production line between different stations, different workshops The series of cart has very small turning radius and can be turned arbitrarily in a narrow space, which is convenient and flexible.

Trackless transfer cart for precise pipe industry 120t is equipped with detachable fixed piles at four corners to ensure that the special flat cart will not slip due to emergency stop during driving, the cart will not slide or tilt when it is stationary on the uphill, the tonnage and size of the cart can be customized according to your needs, the body structure is sturdy, high-grade atmosphere, strong climbing ability, the installation of emergency power-off switch, automatic stop when encountering people and objects, applied to factories, open-air operations, and places with slope.
Perfect Transfer Cart follows the whole process of design, production, finished product, inspection and shipment from the perspective of product practicality, and carries out two inspections in drawing confirmation, material placement, jointing and installation, painting, inspection and loading, and makes gradual improvement by combining the inconvenience in the actual production and use process and the problems in the long-term use process of customers.

Trackless transfer cart for aluminum factory 120 ton is equipped with safety steel plates on the outside of the wheels to prevent debris from entering the cart, The safety plates are installed on the outside of the wheels to prevent debris from entering the vehicle and to ensure the safety of the operator; The protective steel plate is easy to disassemble and install, and safe and reliable, convenient for vehicle repair and maintenance.

Trackless transfer cart with ac motor 1-500 t has seven main technical parameters: power supply mode, load tonnage, table size, table height, track length, track spacing, and operation mode, among which the main technical parameters are power supply mode and load tonnage.

When we are moving goods, due to space limitation, we need trackless transfer cart for steel shop 200t with low platform, but some customers will have some doubts whether the low platform will affect the operation.
Trackless transfer cart for steel shop 200t has the advantages of no need to lay foundation and track, free turning and unrestricted running distance compared with rail flat car, and rubber wheel car (with car wheels) used by other companies, when we design the low platform flat car, we will pay attention to this aspect of the car power shortage, if the slope, we set the ground clearance according to the slope, with the advantages of low platform, high safety, easy operation, etc.
The low table trackless transfer cart for steel shop 200t will not affect the driving, and save space, our company this car technology has matured, according to the workplace restrictions design electric flat car, we from product planning, equipment selection, transportation and distribution, installation and training to post-sale, to provide you with a worry-free service experience.

Trackless transfer cart for marble slab transport 1-500t is generally powered by maintenance-free battery, which can reduce the daily maintenance of the flat car. The process is also flexible, with very little restriction on the layout of the operating area, the ability to adjust accordingly to uneven ground, the ability to rotate in place to turn around, etc. This type of model is used in multiple workshops across the transport. Compared with the rail flat car, trackless car from the dependence on the track, to achieve the flexibility of the operation, used in the factory site and workshop transport workpiece more quickly and conveniently and save time and reduce costs.
Trackless transfer cart for marble slab transport 1-500t can turn 360°, with forward, backward, left and right turn, speed regulation, emergency stop, abnormal light indication, power-on light indication, radar monitoring, etc.

Trackless transfer cart with steel rail wheels 50t is composed of forward, backward, in-situ rotation, eight turn, swing head, swing tail, etc.; drive system, touch electric control system, box beam type frame the system are selected from international famous suppliers products to ensure that the whole vehicle reliable and stable performance, lift, table rotation, side flip, etc.. Trackless transfer cart with steel rail wheels 50t adopts the main components as standard parts common parts.
Working precautions.
1, in order to ensure the normal operation of the Trackless transfer cart with steel rail wheels 50t, the voltmeter and power meter indication on the ground power cabinet should be guaranteed normal. In general, slightly higher than 36v voltage belongs to the normal voltage. Ammeter indication is smaller belongs to the normal situation, but to ensure that the ammeter indication is normal without swing.
2. When loading goods with electric flat car, keep the balance of the center of gravity of the electric flat car. It is best to place the goods separately from the middle to both sides, and unload the goods at both ends first, and then unload the middle, so that the balance of the electric flat car can be effectively maintained for better work.
3、Trackless transfer cart with steel rail wheels 50t conductive surface needs to be cleaned and polished regularly to ensure that the conductive surface is normal. If there is oil, rust, dust and other insulators on the conductive surface of the electric flat car, it may cause abnormalities when conducting electricity, so that the machine can not be properly energized, thus affecting the normal work.

Trackless transfer cart for sale 1-300 t in the case of no external power supply, external power to run freely, mainly through the hydraulic oil pressure transmission so as to achieve the function of lifting, can make the aerial work a greater range, higher efficiency. Hydraulic lifting railcar is not subject to lifting, easy to operate, lifting freely, the height can be designed according to the size provided by the user. Its rated capacity is between 0-80T; power supply is available in BTLto cable-powered type, BDG low-voltage rail-powered type, BXC battery-powered type and BJT cable reel-powered type; running speed is 0-20 meters per minute; control by handle or wireless remote control is optional.
Trackless transfer cart for sale 1-300 t can realize fully automatic AGV handling, which can free up manpower and hands. This large-tonnage handling vehicle has the advantages of coming and going, in situ 360 degrees, etc. Not only that, because the goods are heavy, the large tonnage workshop handling trolley has the function of locking and unlocking when the trolley is running and stopped, and the trolley can only run after unlocking to prevent the hidden problems that exist under the accident. Perfect Transfer Cart’s trolley can also be installed with magnetic stripe navigation, and the trolley can be made explosion-proof and high temperature resistant according to the working conditions.

Trackless transfer cart with flat deck 120 ton electrical engineering control system consists of: control power switch, DC transformer machine equipment, warning light, conductive transfer device, the key effect is to produce the working voltage necessary for the operation of the electric flat deck.
The difference between the Trackless transfer cart with flat deck 120 ton and the hydraulic lift rail trolley is whether it runs on rails or not. The hydraulic lift rail car can turn on the track, but not as much as the trackless transfer cart with flat deck 120 ton moves on the ground. trackless transfer cart with flat deck 120 ton does not need to consider the track laying requirements, the cost of the track and the costs. The trackless transfer cart with flat deck 120 ton has no running route and is more friendly to road conditions. It can run on concrete figure ground, tempered ground, etc. It can achieve 360 degrees and also has a certain climbing ability depending on traction power.
Trackless transfer cart with flat deck 120 ton key has transmission manipulation device, electric engineering manipulation device, cart wheel, window frame composition.
Trackless transfer cart with flat deck 120 ton transmission control system consists of motor, reducer, roller drive belt, braking device and brake control board, the key effect is to drive the electric flat car on the track forward glide.

Trackless transfer cart for freight rail 90 tons is composed of frame, battery, DC motor, reducer, rubber covered wheel, electrical control system, it can travel without laying track, it can transport goods to different places, so that the place of transportation is not limited, it is equipped with brake device on the wheel, it can stop immediately when the power is off, its stable and safe performance is very high, it can realize uninterrupted, turn while walking, making the operation more convenient, it is more popular when transporting materials in factories and workshops.

The trackless transfer carts are designed and produced by Perfect for our customers, and a variety of models and functions are included, such as 5 tons, 10 tons, 15 tons, 20 tons, and 25 tons, trackless transfer carts for coil, mold transfer cart, industrial trailers, and lift platform. In this video, 20 tons trackless coil transfer cart will be shown. If you are interested, you can also contact us freely.

Trackless transfer cart for press rooms grainger 90t is the electric flatbed truck without special track, mainly through the battery for power supply, and the configuration are maintenance-free battery, can reduce the daily maintenance of the flatbed truck. The rooms grainger 90t has no cable and fixed running track, can turn freely, and after special design configuration turning radius is relatively small, and even can achieve in situ turning, turning process is also particularly flexible, the layout of the surrounding operating area is less restrictive, can be adjusted accordingly to the uneven ground.

The Division now produces eleven series of more than one hundred varieties of electric flat cars of various tonnages in the 1-500 ton range, including.
Turning electric flat car, trackless electric flat car, steel ladle car, coil material handling car, paint room electric flat car, sand blasting room electric flat car, hydraulic lifting electric flat car, mechanical lifting electric flat car, cross track electric flat car, vertical turning (traverse) trackless electric flat car, electric turntable, rail tractor, rail track cable release car, explosion-proof electric flat car, tunnel rail car, roller conveyor electric flat car, trackless traction electric flat car, container handling car, etc. We undertake the research and development, design and production of various non-standard and non-conventional types of electric flat cars, material handling vehicles and electromechanical automation models.

Battery Powered Transfer Cart With Robot Arm is used in the assembly line for positional working, The plc system is interesting in the transfer cart to realize automated stop when moving on a station. The transfer platform of the cart can be customized with additional devices to meet the handling needs of different handling situations.

Trackless transfer cart customized color 120t is suitable for 24V, 36V, 48V, 72V, 110VDC (AC) power supply, the battery is installed in the flat car, through the electronic control system to supply power to the motor, so that the flat car start, stop, backward, 72V, direct power supply. Compared with the railed flat car, this series of flat car has the advantages of safety, flexibility, simple structure, easy to use and maintain, large load capacity, low noise, beautiful appearance, etc. It has the characteristics of safety, flexibility, safety, high efficiency, safety and environmental protection. It is used in machinery manufacturing plants, warehouses, metallurgical plants as workshop transportation or crane transportation to transport heavy objects. For example: moulds, raw materials, castings and forgings, riveted and welded parts, processed workpieces and finished products are transported, and it is the first choice for industrial AC power or long-distance transportation. It meets the technical requirements of JB/T6127 electric flat car.
Trackless transfer cart customized color 120t can not only meet the most basic transportation requirements, but also can add hydraulic lifting system according to user needs, to achieve the table lift, side flip and other functions.
Trackless transfer cart customized color 120t is operated by motor through the reducer to drive the smooth running of the flat car, running speed generally 0 ~ 20m / min. wired and wireless remote control operation. The frame adopts box beam steel or section steel welded structure.

The trackless transfer cart with weighing scale 200t is battery-powered. The battery is installed in the trolley. The battery is powered by an electronic control system to the DC motor. We use this principle to operate the car, for example, starting, stopping, moving forward and backward, adjusting the speed, etc. Trackless transfer cart with weighing scale 200ts can be used for both ‘S’ and arc railways.

Trackless transfer cart with ac motor 90 ton adopts Perfect independent research and development of remote control function, which can improve the efficiency of the operator’s use and ensure the safety of the staff. The technician tailor-made the table size 5000*3200 according to the customer’s demand, and the car is equipped with hooks at four corners, which can be flexibly turned left and right in 360 degrees, and can climb the small slope of the workshop doorway of the trackless transfer cart, which has the advantages of high conveying quality, low noise, no pollution and other products.
Perfect Transfer Cart can design and customize various specifications and models of electric flat car spare parts according to the demand of electric flat car users, for the majority of customers to update, replace or modify the electric flat car, reducing the user’s investment costs.

Trackless transfer carts for merchandise 200t are designed to transport heavy goods or equipment from one workshop in a factory to another. It can be used indoors or outdoors. It mainly includes frames, brushless DC motors, reducers, wheels, batteries, chargers, etc., including metallurgy, casting, new plant construction and shipbuilding. We come in different styles and standard capacities, up to 300 tons, and we have the solutions you need, each style can be designed for your specific application.