Home » Trackless Transfer Cart » trackless transfer cart for warehouse 5 ton

trackless transfer cart for warehouse 5 ton

Trackless transfer cart for warehouse 5 ton is a small and medium-sized lifting equipment with track running, mainly consists of gantry (main beam, outrigger, lower cross beam, etc.), lifting mechanism, running mechanism and electric control part, with electric hoist as lifting mechanism, running along the lower flange of main beam I-beam when working. The gantry structure is divided into box type and truss, box type technology number, easy to make, truss light weight, strong wind resistance. trackless transfer cart for warehouse 5 ton machine with light weight, simple structure, easy installation and maintenance, etc., suitable for small and medium lifting capacity range of factories, mines, yards and warehouses and other outdoor places for general loading and unloading lifting work. It is prohibited to work in flammable, explosive and corrosive gas environment. There are three operation methods, such as ground handle, wireless remote control and driver’s room.

Rated 4.5/5 based on 434 customer reviews
Share:
Content
Inquiry
* Name:
* Email:
Country:
Tel:
* Message:
More Trackless Transfer Cart

Trackless transfer cart with scissor lift 400 ton is to be composed of power supply, drive mechanism, steel load bearing frame, steering, travel mechanism, control module and fault diagnosis module. You can choose battery, discharge motor or cable as the power supply of the trackless electric flat car. The series of flat cars are equipped with warning and detecting devices, which immediately issue alarms and automatically stop when encountering objects, and the cars are equipped with automatic intelligent chargers.
1. The choice of battery as the power source can make the cost lower and easier.
2. Can also be installed according to user needs positioning device, device, lifting platform and other auxiliary devices, can be equipped with PLC, to achieve fully automated control.
3. Can be customized according to user needs for frequency conversion start, anti-rollover, lift, wifi wireless communication, scanning, fixed-point stop, waterproof treatment, ultra-low table, climbing and other functional customization. Hydraulic lift railcar runs freely without external power supply and external power, mainly through the pressure transmission of hydraulic oil so as to achieve the function of lifting and lowering, which can make the aerial operation range larger and more efficient.
Trackless transfer cart with scissor lift 400 ton is rated between 0-400T; power supply is available in four types: BTL cable-powered, BDG low-voltage rail-powered, BXC battery-powered and BJT cable reel-powered; running speed is 0-20 meters per minute; handle or wireless remote control is optional. remote control for control.

Trackless transfer cart with steel rail wheels 50t is composed of forward, backward, in-situ rotation, eight turn, swing head, swing tail, etc.; drive system, touch electric control system, box beam type frame the system are selected from international famous suppliers products to ensure that the whole vehicle reliable and stable performance, lift, table rotation, side flip, etc.. Trackless transfer cart with steel rail wheels 50t adopts the main components as standard parts common parts.
Working precautions.
1, in order to ensure the normal operation of the Trackless transfer cart with steel rail wheels 50t, the voltmeter and power meter indication on the ground power cabinet should be guaranteed normal. In general, slightly higher than 36v voltage belongs to the normal voltage. Ammeter indication is smaller belongs to the normal situation, but to ensure that the ammeter indication is normal without swing.
2. When loading goods with electric flat car, keep the balance of the center of gravity of the electric flat car. It is best to place the goods separately from the middle to both sides, and unload the goods at both ends first, and then unload the middle, so that the balance of the electric flat car can be effectively maintained for better work.
3、Trackless transfer cart with steel rail wheels 50t conductive surface needs to be cleaned and polished regularly to ensure that the conductive surface is normal. If there is oil, rust, dust and other insulators on the conductive surface of the electric flat car, it may cause abnormalities when conducting electricity, so that the machine can not be properly energized, thus affecting the normal work.

Trackless transfer cart for polyester strapping 5t working principle.
  1, Trackless transfer cart for polyester strapping 5t drive part consists of two motors, respectively, mounted on the active wheel, the other end has two universal wheel composition;
  2, Trackless transfer cart for polyester strapping 5t running turn is to rely on the two motors of the difference in speed to achieve turning, the specific implementation is through the wireless remote control on the steering button control, press the turn left button, trackless flat car is turned to the left to run, press the turn right button, flat car is turned to the right to run. It has the function of turning while walking without interruption; the whole car has safety and easy operation performance.
  3、Trackless transfer cart for polyester strapping 5t is equipped with brake locking device on the motor of the active wheel, which has the function of stopping when the power is off and stable safety performance.
  4、Trackless transfer cart for polyester strapping 5t is driven by the battery installed inside the flat car to provide DC motor, with the advantages of smooth start, high starting torque, small impact on the reducer, low voltage, long service life, etc.
  5、Trackless transfer cart for polyester strapping 5t requires cement or steel plate ground because the wheels are rubber material.
  6、The whole car runs with safety flexibility, the running distance is not limited, and it is applied to the factory environment which does not need the track

Trackless transfer cart customized color 120t is suitable for 24V, 36V, 48V, 72V, 110VDC (AC) power supply, the battery is installed in the flat car, through the electronic control system to supply power to the motor, so that the flat car start, stop, backward, 72V, direct power supply. Compared with the railed flat car, this series of flat car has the advantages of safety, flexibility, simple structure, easy to use and maintain, large load capacity, low noise, beautiful appearance, etc. It has the characteristics of safety, flexibility, safety, high efficiency, safety and environmental protection. It is used in machinery manufacturing plants, warehouses, metallurgical plants as workshop transportation or crane transportation to transport heavy objects. For example: moulds, raw materials, castings and forgings, riveted and welded parts, processed workpieces and finished products are transported, and it is the first choice for industrial AC power or long-distance transportation. It meets the technical requirements of JB/T6127 electric flat car.
Trackless transfer cart customized color 120t can not only meet the most basic transportation requirements, but also can add hydraulic lifting system according to user needs, to achieve the table lift, side flip and other functions.
Trackless transfer cart customized color 120t is operated by motor through the reducer to drive the smooth running of the flat car, running speed generally 0 ~ 20m / min. wired and wireless remote control operation. The frame adopts box beam steel or section steel welded structure.