trackless transfer cart with emergency stop 1-500 ton

Trackless transfer cart with emergency stop 120 tons is an electric flatbed truck without special tracks, mainly through the battery for power supply, and is equipped with maintenance-free batteries, which can reduce the daily maintenance of the flatbed truck. emergency stop 120 tons without cable
And fixed running track, able to turn freely, and after special design configuration turning radius is relatively small, even to achieve in situ turning, turning process is also particularly flexible, the layout of the surrounding operating area restrictions are even smaller. Can be adjusted for uneven ground.
Because of its obvious advantages, the Trackless transfer cart with emergency stop 120 tons will have greater development in the future in factory workshops and other places where transportation is needed.

Trackless transfer cart for warehouse 5 ton is a small and medium-sized lifting equipment with track running, mainly consists of gantry (main beam, outrigger, lower cross beam, etc.), lifting mechanism, running mechanism and electric control part, with electric hoist as lifting mechanism, running along the lower flange of main beam I-beam when working. The gantry structure is divided into box type and truss, box type technology number, easy to make, truss light weight, strong wind resistance. trackless transfer cart for warehouse 5 ton machine with light weight, simple structure, easy installation and maintenance, etc., suitable for small and medium lifting capacity range of factories, mines, yards and warehouses and other outdoor places for general loading and unloading lifting work. It is prohibited to work in flammable, explosive and corrosive gas environment. There are three operation methods, such as ground handle, wireless remote control and driver’s room.

Trackless transfer cart with flat tread steel wheels 25 tons in a factory. First of all, it is a rail transport vehicle that needs to be laid on the ground. Tracks are generally I-shaped surfaces in contact with tracks; secondly, it is an electrically driven vehicle that is decelerated by an electric motor. Driven by the machine, it runs automatically. Again, it is a flatbed truck with a flatbed table without a lid. In special cases, it can also be non-planar, but without a lid. The body has no steering wheel and only moves forward and backward (even when turning, it rotates on the track).

The trackless transfer cart with warning horn 50t can be driven without fuel, which is not available in any fuel vehicle. This feature is not only suitable for in-plant but also for short-distance transportation, the main features are as follows.
1、Environmental protection and energy saving, low running cost.
2、Low investment and high return rate.
3, high performance, with high-tech sustainable development of great potential.
At present, Trackless transfer cart with warning horn 50t is widely used in automobile production, shipbuilding, mold stamping, mining transportation, steel deployment, large machinery and equipment delivery and assembly, etc.

Trackless transfer cart with ac motor 1-500 t has seven main technical parameters: power supply mode, load tonnage, table size, table height, track length, track spacing, and operation mode, among which the main technical parameters are power supply mode and load tonnage.

The 16t customized steel coil transfer cart is a special steel coil transfer trolley equipped with V-shaped brackets and roller brackets to prevent the steel coils from rolling and falling off. At the same time, the roller bracket can adjust the distance according to the diameter of the coil. The V-shaped frame and the roller frame are connected to the car body and can be disassembled at any time to facilitate the transportation of other materials. We can design according to the working conditions of the workshop, the size and weight of the material, and the coil conveying trolley can be used in various occasions and harsh environments.

Trackless transfer cart iso certified 1-500t with lead-acid battery as energy source, control module as control core, operation handle and remote control as input means, load cargo on the table, steering wheel to guide the direction and and fixed wheel to jointly carry the weight, motor to provide the original power, reducer to amplify the torque and provide to Fixed wheel power, LED sound and light alarm as work and warning signs, and intelligent charger as external power input. With the above functions, together the trackless transfer cart iso certificated 1-500t has the ability to work. In addition to the advantages of easy operation, large starting torque, smooth driving and silent steering, the trackless transfer cart iso certified 1-500t also has the advantage of its structure, it is not constrained by the track and can be steered left and right in a flat field, which is easy to use.

5 Ton ladle transfer cart Is one kind of ladle transfer cart, It can move freely from bay to bay on the cement floor asphalt pavement and epoxy floor, etc, from the production line to the warehouse. all of our design goals are meeting every client’s requirements and needs. The trackless transfer car’s load capacity and table size can be customized according to the client’s requirements and needs, Till now we can design and produce a 2-150 Ton Load Trackless Transfer Car. When the customer’s transportation space limits, we can also design the trackless transfer cart for vertical and horizontal movement.

Trackless transfer cart with steel rail wheels 50t is composed of forward, backward, in-situ rotation, eight turn, swing head, swing tail, etc.; drive system, touch electric control system, box beam type frame the system are selected from international famous suppliers products to ensure that the whole vehicle reliable and stable performance, lift, table rotation, side flip, etc.. Trackless transfer cart with steel rail wheels 50t adopts the main components as standard parts common parts.
Working precautions.
1, in order to ensure the normal operation of the Trackless transfer cart with steel rail wheels 50t, the voltmeter and power meter indication on the ground power cabinet should be guaranteed normal. In general, slightly higher than 36v voltage belongs to the normal voltage. Ammeter indication is smaller belongs to the normal situation, but to ensure that the ammeter indication is normal without swing.
2. When loading goods with electric flat car, keep the balance of the center of gravity of the electric flat car. It is best to place the goods separately from the middle to both sides, and unload the goods at both ends first, and then unload the middle, so that the balance of the electric flat car can be effectively maintained for better work.
3、Trackless transfer cart with steel rail wheels 50t conductive surface needs to be cleaned and polished regularly to ensure that the conductive surface is normal. If there is oil, rust, dust and other insulators on the conductive surface of the electric flat car, it may cause abnormalities when conducting electricity, so that the machine can not be properly energized, thus affecting the normal work.

For material handlingtrackless transfer cart customizing 50 tonDesign requirements.

1、Trackless transfer cart customizing 50 ton operation requirements: stable, safe, can improve the quality of handling.
2、Improve the walking efficiency of transportation and handling, can be used according to the user’s working time optional battery of different capacities.
3、Improve the labor working environment and conditions of the labor force.
4、Require the use of easy to operate, easy maintenance to reduce the requirements of workers’ skills.
5、Increase the service life of the product, reduce the replacement cycle of wearing parts, reduce the corresponding investment in equipment F. Apply in the production line of enterprises to achieve automation to avoid personnel injury.
6、Trackless transfer cart customizing 50 ton appearance design in line with enterprise production to improve the company’s image, perfect technical support, timely resolution of user problems

Trackless transfer cart for marble slab transport 30 ton Product features.
1) The biggest difference with the rail flat car is that the operation is not limited by the track track, and can turn and run freely.

2）It can adapt to the fallen road surface inside and outside the plant. It can also run on slightly undulating road surface.

3）Supporting various operation modes, realizing straight running, traverse, turning, inclined running and in-situ rotation, etc.

4）Simple operation, easy to get started, only need simple training can be skilled in using the flat car.

5）Battery power supply, clean and energy-saving, no pollution.

6）Good safety, with the function of stopping when encountering obstacles, it can automatically decelerate and stop when sensing obstacles.

7）It can realize automatic operation, support path tracking, support remote control, and can reserve the upper computer interface. Provide communication protocol.

Trackless transfer cart with ac motor 90 ton adopts Perfect independent research and development of remote control function, which can improve the efficiency of the operator’s use and ensure the safety of the staff. The technician tailor-made the table size 5000*3200 according to the customer’s demand, and the car is equipped with hooks at four corners, which can be flexibly turned left and right in 360 degrees, and can climb the small slope of the workshop doorway of the trackless transfer cart, which has the advantages of high conveying quality, low noise, no pollution and other products.
Perfect Transfer Cart can design and customize various specifications and models of electric flat car spare parts according to the demand of electric flat car users, for the majority of customers to update, replace or modify the electric flat car, reducing the user’s investment costs.

Trackless transfer cart ce-certified 120 ton With high operation security and good flexibility, our heavy loads transfer vehicle can be applied to high-temperature, high use frequency, and medium-distance or long-distance transportation applications.
This series of heavy loads transfer vehicle uses rails instead of cable wires to offer power. It is safer and more reliable to use. In addition, It can transport on the curved track, circular track, or diverting track. Its application brings great convenience to transportation layout arrangement in factories.

Trackless transfer cart for marble slab transport 30 tons is used for multiple workshops across the transport, which is more convenient than the rail flat car and can greatly improve the work efficiency. With the customer’s demand as the service concept, the electric flat car is manufactured by heart, continuous improvement, strong design team independent research and development design to overcome technical problems, Trackless transfer cart for marble slab transport 30 tons is successfully put into use on a trial basis, Trackless transfer cart for marble slab transport 30 tons The trackless transfer cart for marble slab transport 30 tons is divided into rubber wheel electric leveling cart and pneumatic wheel electric leveling cart according to the different tires, which are widely used in the fields of automobile production, shipbuilding, mold stamping, steel blending, and the transportation and assembly of large machines and equipment.

Trackless transfer cart for steel liquid 30 ton drive wheels and load wheels can choose high strength polyurethane rubber solid tires or pneumatic tires, get rid of the dependence of trackless transfer cart on the ground track, do not destroy the infrastructure, can walk on the ground at will, turn at will without space and ground restrictions, can change the direction of travel and route at any time, very suitable for use in the site of the running route is not fixed.
1、Trackless transfer cart for steel liquid 30 ton adopts crane beam type box structure, CNC cutting of steel plate and intelligent robot welding.
2、The wheels are made of solid cast steel with polyurethane rubber, which can reduce the height of the whole car and ensure the stability of operation.
3、Trackless transfer cart for steel liquid 30 ton adopts balance beam or will install support to assist its flexible turning.
4、Trackless transfer cart for steel liquid 30 ton adopts double drive to increase the power of the dolly when running.
5、Trackless transfer cart for steel liquid 30 ton adopts dual control with the handle and wireless remote control, and the handle is equipped with a directional rocker, which makes the control more convenient and flexible.
6、The table surface can be equipped with anti-slip rubber plate or wooden plate to protect the safety of the workpiece and prevent the workpiece from contacting with the car body directly to cause damage to the workpiece.

Trackless transfer cart for precise pipe industry 120t is equipped with detachable fixed piles at four corners to ensure that the special flat cart will not slip due to emergency stop during driving, the cart will not slide or tilt when it is stationary on the uphill, the tonnage and size of the cart can be customized according to your needs, the body structure is sturdy, high-grade atmosphere, strong climbing ability, the installation of emergency power-off switch, automatic stop when encountering people and objects, applied to factories, open-air operations, and places with slope.
Perfect Transfer Cart follows the whole process of design, production, finished product, inspection and shipment from the perspective of product practicality, and carries out two inspections in drawing confirmation, material placement, jointing and installation, painting, inspection and loading, and makes gradual improvement by combining the inconvenience in the actual production and use process and the problems in the long-term use process of customers.

The trackless transfer carts are designed and produced by Perfect for our customers, and a variety of models and functions are included, such as 5 tons, 10 tons, 15 tons, 20 tons, and 25 tons, trackless transfer carts for coil, mold transfer cart, industrial trailers, and lift platform. In this video, 20 tons trackless coil transfer cart will be shown. If you are interested, you can also contact us freely.

Trackless transfer cart for press rooms grainger 90t is the electric flatbed truck without special track, mainly through the battery for power supply, and the configuration are maintenance-free battery, can reduce the daily maintenance of the flatbed truck. The rooms grainger 90t has no cable and fixed running track, can turn freely, and after special design configuration turning radius is relatively small, and even can achieve in situ turning, turning process is also particularly flexible, the layout of the surrounding operating area is less restrictive, can be adjusted accordingly to the uneven ground.

Trackless transfer cart for metallurgy plant 30 ton adopts box beam structure with high load factor. The whole cart adopts the organic welding of steel plate and profile, with compact structure and generous appearance. The orderly arrangement of ribs ensures the pressure-bearing capacity of the table and is not easily deformed.

Multi-drive transfer cart heavy load transportation designed to move loads up to 1500 tons. with multiple drive-powered types, the Multi-Drive Flatbed Transporter makes moving heavy loads across a facility easy and automated. The video has been shown 8 different transfer cart for industrial use, such as rail transfer cart for industrial production lines, anti-high temperature ladle trackless transfer cart, double rail transfer cart transportation in parallel, universal wheel trackless transfer cart, straight and ”S” paths are available for trackless transfer torrey, hydraulic lifting table transfer car. We can also provide customized services, you can show your needs(load capacity, material dimension, local voltage, etc.)

Trackless transfer cart with custom frames/racks 120 tons internal system works reliably, with high quality configuration parts such as reducer, motor, bearing, etc., strong structure, long service life, can be designed according to customer’s requirements. trackless transfer cart with custom The surface of frames/racks 120 tons is sandblasted and coated with three layers of high-strength anti-rust paint and two layers of top coat, which meets the requirements of environmental regulations. Technical standard of electrical system: the electrical components are made of mature products of international famous brands, the protection level of electric control box is not less than IP54, and all wiring is connected with aviation plug type simple connection, which is easy to install and maintain. Our Trackless transfer cart with custom frames/racks 120 tons is designed with welding sequence and overall grinding and correction process according to its structural characteristics, and the welding process is fixed and welded under the platform and welding fixture to ensure the shape is free of skew and has sufficient load-bearing capacity and anti-deformation capability.

Trackless transfer cart with v frame 6t takes lead-acid battery as energy source, control module as control core; motor as original power; handle and remote control as input means; steering wheel to guide the direction and fixed wheel to carry the weight together; reducer to amplify the torque and provide power to fixed wheel; LED alarm as working and warning sign With the intelligent charger as the external power input: With the above functions, the trackless transfer cart with v frame 6t working capacity is formed together.

When we are moving goods, due to space limitation, we need trackless transfer cart for steel shop 200t with low platform, but some customers will have some doubts whether the low platform will affect the operation.
Trackless transfer cart for steel shop 200t has the advantages of no need to lay foundation and track, free turning and unrestricted running distance compared with rail flat car, and rubber wheel car (with car wheels) used by other companies, when we design the low platform flat car, we will pay attention to this aspect of the car power shortage, if the slope, we set the ground clearance according to the slope, with the advantages of low platform, high safety, easy operation, etc.
The low table trackless transfer cart for steel shop 200t will not affect the driving, and save space, our company this car technology has matured, according to the workplace restrictions design electric flat car, we from product planning, equipment selection, transportation and distribution, installation and training to post-sale, to provide you with a worry-free service experience.

Perfect Transfer Cart is designed for bulk materials, fixed-point transportation, repeated transfer, off-site transfer and other complicated loading and unloading, as well as steering flexibility, loading and unloading, transport, hidden dangers, productivity, etc. The special electric rail flat car, flat trailer, non-powered tractor, the transfer efficiency, labor intensity, sex, is the current transfer vehicles, a very cost-effective product.
Trackless transfer cart customized size 80 tons, is a battery-powered, motor-driven transport tool for pulling goods or people. Ltd. is a company dedicated to the research and development, design, production and sales of the transport industry, the company’s annual production capacity of electric flatbed truck is strong, can produce a variety of tonnage between 1-300 tons BDG low-voltage rail type, BJT cable reel type, BHX slip wire type, BXC battery type, BTL tow cable type, BP non-powered, BWP trackless transport, BQX cable type, BQC battery type. The BDG low-voltage rail-powered electric flat car is divided into BDGS and BDGZ low-voltage rail-powered electric flat car series according to the load tonnage and power transmission source.

Trackless transfer cart with flat steel deck 200 ton is affected by the length of the steel section, the dolly is mostly extra-long table platform, which can be equipped with detachable guardrails on both sides of the table to ensure that the objects will not roll down during transportation. trackless transfer cart with flat steel deck 200 ton flat steel deck 200 ton free turning, smooth driving, no limitation of transport distance, can greatly improve the efficiency.

Trackless transfer carts for merchandise 200t are designed to transport heavy goods or equipment from one workshop in a factory to another. It can be used indoors or outdoors. It mainly includes frames, brushless DC motors, reducers, wheels, batteries, chargers, etc., including metallurgy, casting, new plant construction and shipbuilding. We come in different styles and standard capacities, up to 300 tons, and we have the solutions you need, each style can be designed for your specific application.

Trackless transfer cart manufacturer 75 ton has the advantages of high intelligence, large load capacity, compact structure, beautiful appearance, smooth operation, high positioning, high efficiency, strong climbing ability, long driving distance, simple operation and easy maintenance, etc. Perfect can customize the trackless transfer cart for each type, load capacity, function and application area. Perfect can develop the market with non-standard intelligent design and manufacture to meet the needs of users.

Trackless transfer cart with all terrain wheels 10t, is a kind of flat wagon running on the tracks, motor-driven work, improve the rate of production, also known as rail flat car, ground level car, over the span of the car, electric flat car, etc..
Trackless transfer cart with all terrain wheels 10t construction, generally by the electrical equipment automatic control system, walking wheel system software, power supply system switch power supply system software, drive system software and window frame these composition, power supply is generally by the lead-acid battery, low-voltage 36v rail power supply, slip wire, cable reel, etc.

Trend of Trackless transfer cart with lifting arm 400 ton: With Trackless transfer cart with lifting arm 400 ton, customers can save all the costs of laying tracks and save the valuable space taken up by laying tracks. There is another advantage that customers can use it after unloading the car after purchase.

Trackless transfer cart for the transport of coils 80t table size and tonnage can be customized according to the size of steel structures such as steel sections and coils, and the turning is light and flexible, which is convenient for the round-trip transfer between the production workshop and the storage place, and the protective fence and radar detection device will be added around the cart to ensure the safe and barrier-free operation of the cart.
Trackless transfer cart for the transport of coils 80t In the transfer of heavy mold products, more use trackless flat car, the series of flat car with its own flexible rotation, space-saving, large load-bearing capacity, safety and reliability and other advantages to get a lot of ke favor. It is used to transfer coils to and from the mold workshop and the working workshop, and the rubber mats are laid on the table to prevent the mold from moving.