trackless transfer cart with lifting arm 400 ton

Trackless transfer cart for the transport of coils 80t table size and tonnage can be customized according to the size of steel structures such as steel sections and coils, and the turning is light and flexible, which is convenient for the round-trip transfer between the production workshop and the storage place, and the protective fence and radar detection device will be added around the cart to ensure the safe and barrier-free operation of the cart.
Trackless transfer cart for the transport of coils 80t In the transfer of heavy mold products, more use trackless flat car, the series of flat car with its own flexible rotation, space-saving, large load-bearing capacity, safety and reliability and other advantages to get a lot of ke favor. It is used to transfer coils to and from the mold workshop and the working workshop, and the rubber mats are laid on the table to prevent the mold from moving.

For material handlingtrackless transfer cart customizing 50 tonDesign requirements.

1、Trackless transfer cart customizing 50 ton operation requirements: stable, safe, can improve the quality of handling.
2、Improve the walking efficiency of transportation and handling, can be used according to the user’s working time optional battery of different capacities.
3、Improve the labor working environment and conditions of the labor force.
4、Require the use of easy to operate, easy maintenance to reduce the requirements of workers’ skills.
5、Increase the service life of the product, reduce the replacement cycle of wearing parts, reduce the corresponding investment in equipment F. Apply in the production line of enterprises to achieve automation to avoid personnel injury.
6、Trackless transfer cart customizing 50 ton appearance design in line with enterprise production to improve the company’s image, perfect technical support, timely resolution of user problems

Trackless transfer cart with scissor lift 400 ton is to be composed of power supply, drive mechanism, steel load bearing frame, steering, travel mechanism, control module and fault diagnosis module. You can choose battery, discharge motor or cable as the power supply of the trackless electric flat car. The series of flat cars are equipped with warning and detecting devices, which immediately issue alarms and automatically stop when encountering objects, and the cars are equipped with automatic intelligent chargers.
1. The choice of battery as the power source can make the cost lower and easier.
2. Can also be installed according to user needs positioning device, device, lifting platform and other auxiliary devices, can be equipped with PLC, to achieve fully automated control.
3. Can be customized according to user needs for frequency conversion start, anti-rollover, lift, wifi wireless communication, scanning, fixed-point stop, waterproof treatment, ultra-low table, climbing and other functional customization. Hydraulic lift railcar runs freely without external power supply and external power, mainly through the pressure transmission of hydraulic oil so as to achieve the function of lifting and lowering, which can make the aerial operation range larger and more efficient.
Trackless transfer cart with scissor lift 400 ton is rated between 0-400T; power supply is available in four types: BTL cable-powered, BDG low-voltage rail-powered, BXC battery-powered and BJT cable reel-powered; running speed is 0-20 meters per minute; handle or wireless remote control is optional. remote control for control.

Trackless transfer cart with ac motor 1-500 t has seven main technical parameters: power supply mode, load tonnage, table size, table height, track length, track spacing, and operation mode, among which the main technical parameters are power supply mode and load tonnage.

Trackless transfer cart for warehouse handling 120t is mostly used in metallurgical industry when transferring metal ladles such as steel ladle, slag ladle, iron ladle, etc. The temperature of the outer surface of the ladle body is more than 200-300°C. Therefore, it is necessary to do heat insulation protection for electrical parts.
300 ° C or even, so the need to do thermal protection of electrical components, the dolly more laying refractory bricks insulation.
Trackless transfer cart for warehouse handling 120t can be used for lathe processing enterprises, the transport of different specifications of machine tools, can be in the machine tool production line between different stations, different workshops The series of cart has very small turning radius and can be turned arbitrarily in a narrow space, which is convenient and flexible.

Transfer cars move products from one place lane to another and can be either manual or automatic. And this video will be shown our automatic transfer car capacity of 10 tons, Transfer cars can travel long distances and may be more cost-effective than chain transfer. It can achieve 360 degrees of flexible turning, forward, backward, left and right rotation, speed regulation, emergency stop, and safety warning lights, It has simple functions and smoothes running. the operation is small and is not restricted by any space environment, It is widely used in various industries.

The trackless transfer carts are designed and produced by Perfect for our customers, and a variety of models and functions are included, such as 5 tons, 10 tons, 15 tons, 20 tons, and 25 tons, trackless transfer carts for coil, mold transfer cart, industrial trailers, and lift platform. In this video, 20 tons trackless coil transfer cart will be shown. If you are interested, you can also contact us freely.

Trackless transfer cart for steel liquid 30 ton drive wheels and load wheels can choose high strength polyurethane rubber solid tires or pneumatic tires, get rid of the dependence of trackless transfer cart on the ground track, do not destroy the infrastructure, can walk on the ground at will, turn at will without space and ground restrictions, can change the direction of travel and route at any time, very suitable for use in the site of the running route is not fixed.
1、Trackless transfer cart for steel liquid 30 ton adopts crane beam type box structure, CNC cutting of steel plate and intelligent robot welding.
2、The wheels are made of solid cast steel with polyurethane rubber, which can reduce the height of the whole car and ensure the stability of operation.
3、Trackless transfer cart for steel liquid 30 ton adopts balance beam or will install support to assist its flexible turning.
4、Trackless transfer cart for steel liquid 30 ton adopts double drive to increase the power of the dolly when running.
5、Trackless transfer cart for steel liquid 30 ton adopts dual control with the handle and wireless remote control, and the handle is equipped with a directional rocker, which makes the control more convenient and flexible.
6、The table surface can be equipped with anti-slip rubber plate or wooden plate to protect the safety of the workpiece and prevent the workpiece from contacting with the car body directly to cause damage to the workpiece.

Trackless transfer cart for the transport of coils 30 ton, is my company’s low-voltage rail power supply flat car, low-voltage rail flat car is the use of voltage regulator to lower the electricity to the human body voltage 36v to the track, so that even if the personnel touched the track will not be an accident, and then through the wheels to take electricity to the body of the voltage booster This is the simple principle of low-voltage track. Trackless transfer cart for the transport of coils 30 ton is suitable for long-distance, harsh, transport situation work, save the battery and charging time, can 24 hours of non-stop operation, but for the track laying requirements are high, it is recommended that the new plant construction when put into the track laying, the track to do insulation treatment. Can be a lot of unnecessary trouble, trackless transfer cart for the transport of coils 30 ton is recommended for customers who need to weigh more than 5 tons (T) to choose. Small tonnage is still recommended to use the battery power supply is more convenient and comfortable.

Trackless transfer cart long service life 10 ton is easy to operate, with the assistance of the track, only with the control of the flat car in and out, there is a trackless vehicle relative to the track car, trackless that is no track, trackless transfer cart long service life 10 ton operation Relying on manual manipulation, the direction and route of operation also by manual control, manipulation operation is relatively difficult, but after familiar with the operation, trackless car can be turned at the origin, and not limited by the rail car and slip wire, this car can reach any place.

Trackless transfer cart for freight rail 90 tons is composed of frame, battery, DC motor, reducer, rubber covered wheel, electrical control system, it can travel without laying track, it can transport goods to different places, so that the place of transportation is not limited, it is equipped with brake device on the wheel, it can stop immediately when the power is off, its stable and safe performance is very high, it can realize uninterrupted, turn while walking, making the operation more convenient, it is more popular when transporting materials in factories and workshops.

Trackless transfer cart with ac motor 90 ton adopts Perfect independent research and development of remote control function, which can improve the efficiency of the operator’s use and ensure the safety of the staff. The technician tailor-made the table size 5000*3200 according to the customer’s demand, and the car is equipped with hooks at four corners, which can be flexibly turned left and right in 360 degrees, and can climb the small slope of the workshop doorway of the trackless transfer cart, which has the advantages of high conveying quality, low noise, no pollution and other products.
Perfect Transfer Cart can design and customize various specifications and models of electric flat car spare parts according to the demand of electric flat car users, for the majority of customers to update, replace or modify the electric flat car, reducing the user’s investment costs.

Trackless transfer cart customized color 120t is suitable for 24V, 36V, 48V, 72V, 110VDC (AC) power supply, the battery is installed in the flat car, through the electronic control system to supply power to the motor, so that the flat car start, stop, backward, 72V, direct power supply. Compared with the railed flat car, this series of flat car has the advantages of safety, flexibility, simple structure, easy to use and maintain, large load capacity, low noise, beautiful appearance, etc. It has the characteristics of safety, flexibility, safety, high efficiency, safety and environmental protection. It is used in machinery manufacturing plants, warehouses, metallurgical plants as workshop transportation or crane transportation to transport heavy objects. For example: moulds, raw materials, castings and forgings, riveted and welded parts, processed workpieces and finished products are transported, and it is the first choice for industrial AC power or long-distance transportation. It meets the technical requirements of JB/T6127 electric flat car.
Trackless transfer cart customized color 120t can not only meet the most basic transportation requirements, but also can add hydraulic lifting system according to user needs, to achieve the table lift, side flip and other functions.
Trackless transfer cart customized color 120t is operated by motor through the reducer to drive the smooth running of the flat car, running speed generally 0 ~ 20m / min. wired and wireless remote control operation. The frame adopts box beam steel or section steel welded structure.

Trackless transfer cart with emergency stop 120 tons is an electric flatbed truck without special tracks, mainly through the battery for power supply, and is equipped with maintenance-free batteries, which can reduce the daily maintenance of the flatbed truck. emergency stop 120 tons without cable
And fixed running track, able to turn freely, and after special design configuration turning radius is relatively small, even to achieve in situ turning, turning process is also particularly flexible, the layout of the surrounding operating area restrictions are even smaller. Can be adjusted for uneven ground.
Because of its obvious advantages, the Trackless transfer cart with emergency stop 120 tons will have greater development in the future in factory workshops and other places where transportation is needed.

Trackless transfer cart with all terrain wheels 10t, is a kind of flat wagon running on the tracks, motor-driven work, improve the rate of production, also known as rail flat car, ground level car, over the span of the car, electric flat car, etc..
Trackless transfer cart with all terrain wheels 10t construction, generally by the electrical equipment automatic control system, walking wheel system software, power supply system switch power supply system software, drive system software and window frame these composition, power supply is generally by the lead-acid battery, low-voltage 36v rail power supply, slip wire, cable reel, etc.

Trackless transfer cart for marble slab transport 1-500t is generally powered by maintenance-free battery, which can reduce the daily maintenance of the flat car. The process is also flexible, with very little restriction on the layout of the operating area, the ability to adjust accordingly to uneven ground, the ability to rotate in place to turn around, etc. This type of model is used in multiple workshops across the transport. Compared with the rail flat car, trackless car from the dependence on the track, to achieve the flexibility of the operation, used in the factory site and workshop transport workpiece more quickly and conveniently and save time and reduce costs.
Trackless transfer cart for marble slab transport 1-500t can turn 360°, with forward, backward, left and right turn, speed regulation, emergency stop, abnormal light indication, power-on light indication, radar monitoring, etc.

Trackless transfer cart for metallurgy plant 30 ton adopts box beam structure with high load factor. The whole cart adopts the organic welding of steel plate and profile, with compact structure and generous appearance. The orderly arrangement of ribs ensures the pressure-bearing capacity of the table and is not easily deformed.

Trackless transfer cart for aluminum factory 120 ton is equipped with safety steel plates on the outside of the wheels to prevent debris from entering the cart, The safety plates are installed on the outside of the wheels to prevent debris from entering the vehicle and to ensure the safety of the operator; The protective steel plate is easy to disassemble and install, and safe and reliable, convenient for vehicle repair and maintenance.

The 16t customized steel coil transfer cart is a special steel coil transfer trolley equipped with V-shaped brackets and roller brackets to prevent the steel coils from rolling and falling off. At the same time, the roller bracket can adjust the distance according to the diameter of the coil. The V-shaped frame and the roller frame are connected to the car body and can be disassembled at any time to facilitate the transportation of other materials. We can design according to the working conditions of the workshop, the size and weight of the material, and the coil conveying trolley can be used in various occasions and harsh environments.

Trackless transfer cart for warehouses 5 tons is mainly applied with dynamic lifting and transporting water billet car, etc.; electric kiln loading cart and electric kiln discharging cart for brick factory, kiln factory, refractory factory, ceramic factory, roasting factory, etc.; electric transportation cart for engineering, tunnel, sanitation, electric tipping cart, electric sanitation cleaning cart, etc. Electric transporters and electric dumpers are also used in flour mills, mineral processing plants, foundries, chemical plants, furnace plants, farms, etc.

Trackless transfer cart with custom frames/racks 120 tons internal system works reliably, with high quality configuration parts such as reducer, motor, bearing, etc., strong structure, long service life, can be designed according to customer’s requirements. trackless transfer cart with custom The surface of frames/racks 120 tons is sandblasted and coated with three layers of high-strength anti-rust paint and two layers of top coat, which meets the requirements of environmental regulations. Technical standard of electrical system: the electrical components are made of mature products of international famous brands, the protection level of electric control box is not less than IP54, and all wiring is connected with aviation plug type simple connection, which is easy to install and maintain. Our Trackless transfer cart with custom frames/racks 120 tons is designed with welding sequence and overall grinding and correction process according to its structural characteristics, and the welding process is fixed and welded under the platform and welding fixture to ensure the shape is free of skew and has sufficient load-bearing capacity and anti-deformation capability.

Trackless transfer cart for precise pipe industry 120t is equipped with detachable fixed piles at four corners to ensure that the special flat cart will not slip due to emergency stop during driving, the cart will not slide or tilt when it is stationary on the uphill, the tonnage and size of the cart can be customized according to your needs, the body structure is sturdy, high-grade atmosphere, strong climbing ability, the installation of emergency power-off switch, automatic stop when encountering people and objects, applied to factories, open-air operations, and places with slope.
Perfect Transfer Cart follows the whole process of design, production, finished product, inspection and shipment from the perspective of product practicality, and carries out two inspections in drawing confirmation, material placement, jointing and installation, painting, inspection and loading, and makes gradual improvement by combining the inconvenience in the actual production and use process and the problems in the long-term use process of customers.

Trackless transfer cart with flat steel deck 200 ton is affected by the length of the steel section, the dolly is mostly extra-long table platform, which can be equipped with detachable guardrails on both sides of the table to ensure that the objects will not roll down during transportation. trackless transfer cart with flat steel deck 200 ton flat steel deck 200 ton free turning, smooth driving, no limitation of transport distance, can greatly improve the efficiency.

Trackless transfer cart iso certified 1-500t with lead-acid battery as energy source, control module as control core, operation handle and remote control as input means, load cargo on the table, steering wheel to guide the direction and and fixed wheel to jointly carry the weight, motor to provide the original power, reducer to amplify the torque and provide to Fixed wheel power, LED sound and light alarm as work and warning signs, and intelligent charger as external power input. With the above functions, together the trackless transfer cart iso certificated 1-500t has the ability to work. In addition to the advantages of easy operation, large starting torque, smooth driving and silent steering, the trackless transfer cart iso certified 1-500t also has the advantage of its structure, it is not constrained by the track and can be steered left and right in a flat field, which is easy to use.

Trackless transfer carts for merchandise 200t are designed to transport heavy goods or equipment from one workshop in a factory to another. It can be used indoors or outdoors. It mainly includes frames, brushless DC motors, reducers, wheels, batteries, chargers, etc., including metallurgy, casting, new plant construction and shipbuilding. We come in different styles and standard capacities, up to 300 tons, and we have the solutions you need, each style can be designed for your specific application.

Trackless transfer cart for press rooms grainger 90t is the electric flatbed truck without special track, mainly through the battery for power supply, and the configuration are maintenance-free battery, can reduce the daily maintenance of the flatbed truck. The rooms grainger 90t has no cable and fixed running track, can turn freely, and after special design configuration turning radius is relatively small, and even can achieve in situ turning, turning process is also particularly flexible, the layout of the surrounding operating area is less restrictive, can be adjusted accordingly to the uneven ground.

Trackless transfer cart with flat deck 120 ton electrical engineering control system consists of: control power switch, DC transformer machine equipment, warning light, conductive transfer device, the key effect is to produce the working voltage necessary for the operation of the electric flat deck.
The difference between the Trackless transfer cart with flat deck 120 ton and the hydraulic lift rail trolley is whether it runs on rails or not. The hydraulic lift rail car can turn on the track, but not as much as the trackless transfer cart with flat deck 120 ton moves on the ground. trackless transfer cart with flat deck 120 ton does not need to consider the track laying requirements, the cost of the track and the costs. The trackless transfer cart with flat deck 120 ton has no running route and is more friendly to road conditions. It can run on concrete figure ground, tempered ground, etc. It can achieve 360 degrees and also has a certain climbing ability depending on traction power.
Trackless transfer cart with flat deck 120 ton key has transmission manipulation device, electric engineering manipulation device, cart wheel, window frame composition.
Trackless transfer cart with flat deck 120 ton transmission control system consists of motor, reducer, roller drive belt, braking device and brake control board, the key effect is to drive the electric flat car on the track forward glide.

Trend of Trackless transfer cart with lifting arm 400 ton: With Trackless transfer cart with lifting arm 400 ton, customers can save all the costs of laying tracks and save the valuable space taken up by laying tracks. There is another advantage that customers can use it after unloading the car after purchase.

Trackless transfer cart with warning horn 75t is also known as over-span car, electric flat car is a kind of wheeled transport equipment that can be steered at will by manual control, because it adopts high strength polyurethane rubber wheels as driving wheels and bearing wheels, it gets rid of the dependence of the track car on the ground track, and can walk directly on the ground without destroying the infrastructure.
Trackless transfer cart with warning horn 75t can turn 360 degrees flexibly, with forward, backward, left turn, right turn button, speed control button, emergency stop button, abnormal light indication, power on light indication, authority key and other control buttons. Trackless transfer cart with warning horn 75t has the advantages of simple operation, smooth turning and easy maintenance. Its tonnage, table size, power supply mode, technical requirements can be non-standard customized

Trackless transfer cart for polyester strapping 25 ton is a frame structure with four longitudinal beams and a number of crossbeams and paving plates welded together, usually using large channel steel as the longitudinal and crossbeams of the frame, taking eight points to carry the load, the frame is evenly stressed. The flat bearing seat on the wheel pair is connected with the frame through bolts, and this structure effectively reduces the height of the table.
The reducer of the transmission device is placed at one end of the flat car for holding the shaft, which is convenient for assembly maintenance and modification.
Trackless transfer cart for polyester strapping 25 ton is equipped with a connecting hook at the front and rear, which can pull other flat car or be pulled when necessary. Both sides of the flat car are equipped with lifting holes for easy lifting.