trackless transfer cart with warning alarm 50 ton

Trackless transfer cart with flat deck 120 ton electrical engineering control system consists of: control power switch, DC transformer machine equipment, warning light, conductive transfer device, the key effect is to produce the working voltage necessary for the operation of the electric flat deck.
The difference between the Trackless transfer cart with flat deck 120 ton and the hydraulic lift rail trolley is whether it runs on rails or not. The hydraulic lift rail car can turn on the track, but not as much as the trackless transfer cart with flat deck 120 ton moves on the ground. trackless transfer cart with flat deck 120 ton does not need to consider the track laying requirements, the cost of the track and the costs. The trackless transfer cart with flat deck 120 ton has no running route and is more friendly to road conditions. It can run on concrete figure ground, tempered ground, etc. It can achieve 360 degrees and also has a certain climbing ability depending on traction power.
Trackless transfer cart with flat deck 120 ton key has transmission manipulation device, electric engineering manipulation device, cart wheel, window frame composition.
Trackless transfer cart with flat deck 120 ton transmission control system consists of motor, reducer, roller drive belt, braking device and brake control board, the key effect is to drive the electric flat car on the track forward glide.

Trackless transfer cart with flat steel deck 200 ton is affected by the length of the steel section, the dolly is mostly extra-long table platform, which can be equipped with detachable guardrails on both sides of the table to ensure that the objects will not roll down during transportation. trackless transfer cart with flat steel deck 200 ton flat steel deck 200 ton free turning, smooth driving, no limitation of transport distance, can greatly improve the efficiency.

Trackless transfer cart with custom frames/racks 120 tons internal system works reliably, with high quality configuration parts such as reducer, motor, bearing, etc., strong structure, long service life, can be designed according to customer’s requirements. trackless transfer cart with custom The surface of frames/racks 120 tons is sandblasted and coated with three layers of high-strength anti-rust paint and two layers of top coat, which meets the requirements of environmental regulations. Technical standard of electrical system: the electrical components are made of mature products of international famous brands, the protection level of electric control box is not less than IP54, and all wiring is connected with aviation plug type simple connection, which is easy to install and maintain. Our Trackless transfer cart with custom frames/racks 120 tons is designed with welding sequence and overall grinding and correction process according to its structural characteristics, and the welding process is fixed and welded under the platform and welding fixture to ensure the shape is free of skew and has sufficient load-bearing capacity and anti-deformation capability.

Trackless transfer cart with ac motor 1-500 t has seven main technical parameters: power supply mode, load tonnage, table size, table height, track length, track spacing, and operation mode, among which the main technical parameters are power supply mode and load tonnage.

Trackless transfer cart for press rooms grainger 90t is the electric flatbed truck without special track, mainly through the battery for power supply, and the configuration are maintenance-free battery, can reduce the daily maintenance of the flatbed truck. The rooms grainger 90t has no cable and fixed running track, can turn freely, and after special design configuration turning radius is relatively small, and even can achieve in situ turning, turning process is also particularly flexible, the layout of the surrounding operating area is less restrictive, can be adjusted accordingly to the uneven ground.

The trackless transfer carts are designed and produced by Perfect for our customers, and a variety of models and functions are included, such as 5 tons, 10 tons, 15 tons, 20 tons, and 25 tons, trackless transfer carts for coil, mold transfer cart, industrial trailers, and lift platform. In this video, 20 tons trackless coil transfer cart will be shown. If you are interested, you can also contact us freely.

Battery Powered Transfer Cart With Robot Arm is used in the assembly line for positional working, The plc system is interesting in the transfer cart to realize automated stop when moving on a station. The transfer platform of the cart can be customized with additional devices to meet the handling needs of different handling situations.

Trackless transfer cart iso certified 1-500t with lead-acid battery as energy source, control module as control core, operation handle and remote control as input means, load cargo on the table, steering wheel to guide the direction and and fixed wheel to jointly carry the weight, motor to provide the original power, reducer to amplify the torque and provide to Fixed wheel power, LED sound and light alarm as work and warning signs, and intelligent charger as external power input. With the above functions, together the trackless transfer cart iso certificated 1-500t has the ability to work. In addition to the advantages of easy operation, large starting torque, smooth driving and silent steering, the trackless transfer cart iso certified 1-500t also has the advantage of its structure, it is not constrained by the track and can be steered left and right in a flat field, which is easy to use.

Trackless transfer cart for sale 200t, as the name implies, does not need to transfer pieces, loading and other workpieces, is a special type of electric flat car, mainly using polyurethane covered rubber wheels. As a factory and workshop crossover, trackless rubber wheel electric flat car can not only go straight, but also turn and walk, which greatly improves the convenience of regional transportation and solves the trouble of many enterprises in transporting goods in different directions.
Trackless transfer cart for sale 200t As a kind of handling equipment in industrial workshops, different styles of trackless electric flat carts solve the transportation work of various workshops and plants.

The transportation of material workpieces within the handling car, more and more manufacturers use electric flat car to complete, the following we introduce the characteristics of the trackless electric flat car.
Compared with the rail flat car, Trackless transfer cart for sale 200t gets rid of the dependence on the rail and realizes the flexibility and freedom of mobile operation. It is used for conveying materials at factory sites and workshops, which is faster and more convenient, saving time and reducing costs.

The trackless transfer cart with weighing scale 200t is battery-powered. The battery is installed in the trolley. The battery is powered by an electronic control system to the DC motor. We use this principle to operate the car, for example, starting, stopping, moving forward and backward, adjusting the speed, etc. Trackless transfer cart with weighing scale 200ts can be used for both ‘S’ and arc railways.

Heavy load mold transfer cart is one of our common and mature product, which is customized as per customers’ true need. Such as power supply, control system, operation system, track or no track, steerable, wheelstype, cart frame structure and so on, and then provide proper solution to you. This video will be shown that Perfect cart for heavy load mold. If you have any questions, please feel free to contact us.

Advantages Trackless Transfer Cart Remote Control

Load capacity, table size, and rail gauge can be customized on request.
Power supply mode: Battery-powered, cable-powered, low voltage rail-powered, busbar powered.
Options: Warning light, radar detector, remote controller, electrical parts.
Run on rail or floor.
12 months warranty.
After-sale service provided, engineer available overseas.

Product function

1、Transportation: Trackless transfer cart with flat deck 75t is a product designed for transportation, so the primary function is transportation.
2、Turning: Trackless transfer cart with flat deck 75t is equipped with steering wheels and steering control, so the control of turning is one of its main functions.
3、Lifting: Trackless transfer cart with flat deck 75t can be added with hydraulic and mechanical lifting devices according to customers’ needs, so that the lifting function can be achieved on the basis of the original one.
4、Side-turning: Trackless transfer cart with flat deck 75t can be added with hydraulic and mechanical side-turning devices according to customers’ needs to achieve the side-turning function on the original basis.
5、Table rolling: Trackless transfer cart with flat deck 75t can add rollers, rollers and other devices according to customers’ needs to achieve the function of turning cylindrical workpieces and smoothly moving flat workpieces on the original basis.
6、Other functions: The company can customize and develop the functions required by customers.

When we are moving goods, due to space limitation, we need trackless transfer cart for steel shop 200t with low platform, but some customers will have some doubts whether the low platform will affect the operation.
Trackless transfer cart for steel shop 200t has the advantages of no need to lay foundation and track, free turning and unrestricted running distance compared with rail flat car, and rubber wheel car (with car wheels) used by other companies, when we design the low platform flat car, we will pay attention to this aspect of the car power shortage, if the slope, we set the ground clearance according to the slope, with the advantages of low platform, high safety, easy operation, etc.
The low table trackless transfer cart for steel shop 200t will not affect the driving, and save space, our company this car technology has matured, according to the workplace restrictions design electric flat car, we from product planning, equipment selection, transportation and distribution, installation and training to post-sale, to provide you with a worry-free service experience.

Trackless transfer cart for precise pipe industry 120t is equipped with detachable fixed piles at four corners to ensure that the special flat cart will not slip due to emergency stop during driving, the cart will not slide or tilt when it is stationary on the uphill, the tonnage and size of the cart can be customized according to your needs, the body structure is sturdy, high-grade atmosphere, strong climbing ability, the installation of emergency power-off switch, automatic stop when encountering people and objects, applied to factories, open-air operations, and places with slope.
Perfect Transfer Cart follows the whole process of design, production, finished product, inspection and shipment from the perspective of product practicality, and carries out two inspections in drawing confirmation, material placement, jointing and installation, painting, inspection and loading, and makes gradual improvement by combining the inconvenience in the actual production and use process and the problems in the long-term use process of customers.

Trackless transfer cart for aluminum factory 120 ton is equipped with safety steel plates on the outside of the wheels to prevent debris from entering the cart, The safety plates are installed on the outside of the wheels to prevent debris from entering the vehicle and to ensure the safety of the operator; The protective steel plate is easy to disassemble and install, and safe and reliable, convenient for vehicle repair and maintenance.

Trackless transfer cart for the transport of coils 30 ton, is my company’s low-voltage rail power supply flat car, low-voltage rail flat car is the use of voltage regulator to lower the electricity to the human body voltage 36v to the track, so that even if the personnel touched the track will not be an accident, and then through the wheels to take electricity to the body of the voltage booster This is the simple principle of low-voltage track. Trackless transfer cart for the transport of coils 30 ton is suitable for long-distance, harsh, transport situation work, save the battery and charging time, can 24 hours of non-stop operation, but for the track laying requirements are high, it is recommended that the new plant construction when put into the track laying, the track to do insulation treatment. Can be a lot of unnecessary trouble, trackless transfer cart for the transport of coils 30 ton is recommended for customers who need to weigh more than 5 tons (T) to choose. Small tonnage is still recommended to use the battery power supply is more convenient and comfortable.

Trackless transfer cart for steel 25t adopts solid cast steel covered rubber wheels, Trackless transfer cart for steel 25t is customized with large load capacity without track, requiring high ground level and bearing capacity, and the direction of guidance by the steering wheel can be freely turned. Battery life is limited, there is a requirement for working time, suitable for the use of infrequent work occasions.

Product structure:
The battery flat car is composed of driving part, walking structure and control system, 80t trackless transfer car parameters, all are modular composition, simple and convenient maintenance and replacement

Product parts:
DC motor: brush motor, high torque, can be used in the use of high frequency occasions.
Brake: The brake can be divided into electromagnetic brake and holding brake, which is the common brake.
Remote control:The remote control can choose rocker control, which controls the turning direction of the flat car through the direction of the rocker.

Trackless transfer cart with steel rail wheels 50t is composed of forward, backward, in-situ rotation, eight turn, swing head, swing tail, etc.; drive system, touch electric control system, box beam type frame the system are selected from international famous suppliers products to ensure that the whole vehicle reliable and stable performance, lift, table rotation, side flip, etc.. Trackless transfer cart with steel rail wheels 50t adopts the main components as standard parts common parts.
Working precautions.
1, in order to ensure the normal operation of the Trackless transfer cart with steel rail wheels 50t, the voltmeter and power meter indication on the ground power cabinet should be guaranteed normal. In general, slightly higher than 36v voltage belongs to the normal voltage. Ammeter indication is smaller belongs to the normal situation, but to ensure that the ammeter indication is normal without swing.
2. When loading goods with electric flat car, keep the balance of the center of gravity of the electric flat car. It is best to place the goods separately from the middle to both sides, and unload the goods at both ends first, and then unload the middle, so that the balance of the electric flat car can be effectively maintained for better work.
3、Trackless transfer cart with steel rail wheels 50t conductive surface needs to be cleaned and polished regularly to ensure that the conductive surface is normal. If there is oil, rust, dust and other insulators on the conductive surface of the electric flat car, it may cause abnormalities when conducting electricity, so that the machine can not be properly energized, thus affecting the normal work.

Trackless transfer cart for freight rail 90 tons is composed of frame, battery, DC motor, reducer, rubber covered wheel, electrical control system, it can travel without laying track, it can transport goods to different places, so that the place of transportation is not limited, it is equipped with brake device on the wheel, it can stop immediately when the power is off, its stable and safe performance is very high, it can realize uninterrupted, turn while walking, making the operation more convenient, it is more popular when transporting materials in factories and workshops.

Trackless transfer cart for marble slab transport 1-500t is generally powered by maintenance-free battery, which can reduce the daily maintenance of the flat car. The process is also flexible, with very little restriction on the layout of the operating area, the ability to adjust accordingly to uneven ground, the ability to rotate in place to turn around, etc. This type of model is used in multiple workshops across the transport. Compared with the rail flat car, trackless car from the dependence on the track, to achieve the flexibility of the operation, used in the factory site and workshop transport workpiece more quickly and conveniently and save time and reduce costs.
Trackless transfer cart for marble slab transport 1-500t can turn 360°, with forward, backward, left and right turn, speed regulation, emergency stop, abnormal light indication, power-on light indication, radar monitoring, etc.

Trackless transfer cart with warning alarm 50 ton solid tire type electric leveling cart 50 ton trackless mold transfer cart The series of trackless electric leveling cart is a kind of manned electric transportation equipment. This series of handling trolley has safety protection as well as various shifting load functions of transport trolley, with lead-acid battery or lithium battery as energy source, DC motor speed control drive technology, multi-wheel hydraulic steering technology and dual operation modes of wire control and remote control, so that the flat trolley can realize the functions of start, stop, forward, backward, turn, etc. It is used to transport and move molds, coils, blanks and other large and heavy loads. “Trackless transfer cart with warning alarm 50 ton”, it is safe, efficient and ideally suited for transporting molds, coils and other heavy loads throughout production plants and facilities.

Trackless transfer cart with ac motor 90 ton adopts Perfect independent research and development of remote control function, which can improve the efficiency of the operator’s use and ensure the safety of the staff. The technician tailor-made the table size 5000*3200 according to the customer’s demand, and the car is equipped with hooks at four corners, which can be flexibly turned left and right in 360 degrees, and can climb the small slope of the workshop doorway of the trackless transfer cart, which has the advantages of high conveying quality, low noise, no pollution and other products.
Perfect Transfer Cart can design and customize various specifications and models of electric flat car spare parts according to the demand of electric flat car users, for the majority of customers to update, replace or modify the electric flat car, reducing the user’s investment costs.

Trackless transfer cart ce-certified 120 ton With high operation security and good flexibility, our heavy loads transfer vehicle can be applied to high-temperature, high use frequency, and medium-distance or long-distance transportation applications.
This series of heavy loads transfer vehicle uses rails instead of cable wires to offer power. It is safer and more reliable to use. In addition, It can transport on the curved track, circular track, or diverting track. Its application brings great convenience to transportation layout arrangement in factories.

Perfect Transfer Cart is designed for bulk materials, fixed-point transportation, repeated transfer, off-site transfer and other complicated loading and unloading, as well as steering flexibility, loading and unloading, transport, hidden dangers, productivity, etc. The special electric rail flat car, flat trailer, non-powered tractor, the transfer efficiency, labor intensity, sex, is the current transfer vehicles, a very cost-effective product.
Trackless transfer cart customized size 80 tons, is a battery-powered, motor-driven transport tool for pulling goods or people. Ltd. is a company dedicated to the research and development, design, production and sales of the transport industry, the company’s annual production capacity of electric flatbed truck is strong, can produce a variety of tonnage between 1-300 tons BDG low-voltage rail type, BJT cable reel type, BHX slip wire type, BXC battery type, BTL tow cable type, BP non-powered, BWP trackless transport, BQX cable type, BQC battery type. The BDG low-voltage rail-powered electric flat car is divided into BDGS and BDGZ low-voltage rail-powered electric flat car series according to the load tonnage and power transmission source.

Trackless transfer cart for polyester strapping 5t working principle.
　　1, Trackless transfer cart for polyester strapping 5t drive part consists of two motors, respectively, mounted on the active wheel, the other end has two universal wheel composition;
　　2, Trackless transfer cart for polyester strapping 5t running turn is to rely on the two motors of the difference in speed to achieve turning, the specific implementation is through the wireless remote control on the steering button control, press the turn left button, trackless flat car is turned to the left to run, press the turn right button, flat car is turned to the right to run. It has the function of turning while walking without interruption; the whole car has safety and easy operation performance.
　　3、Trackless transfer cart for polyester strapping 5t is equipped with brake locking device on the motor of the active wheel, which has the function of stopping when the power is off and stable safety performance.
　　4、Trackless transfer cart for polyester strapping 5t is driven by the battery installed inside the flat car to provide DC motor, with the advantages of smooth start, high starting torque, small impact on the reducer, low voltage, long service life, etc.
　　5、Trackless transfer cart for polyester strapping 5t requires cement or steel plate ground because the wheels are rubber material.
　　6、The whole car runs with safety flexibility, the running distance is not limited, and it is applied to the factory environment which does not need the track

Trackless transfer cart for warehouse handling 120t is mostly used in metallurgical industry when transferring metal ladles such as steel ladle, slag ladle, iron ladle, etc. The temperature of the outer surface of the ladle body is more than 200-300°C. Therefore, it is necessary to do heat insulation protection for electrical parts.
300 ° C or even, so the need to do thermal protection of electrical components, the dolly more laying refractory bricks insulation.
Trackless transfer cart for warehouse handling 120t can be used for lathe processing enterprises, the transport of different specifications of machine tools, can be in the machine tool production line between different stations, different workshops The series of cart has very small turning radius and can be turned arbitrarily in a narrow space, which is convenient and flexible.

Trackless transfer cart for the transport of coils 80t table size and tonnage can be customized according to the size of steel structures such as steel sections and coils, and the turning is light and flexible, which is convenient for the round-trip transfer between the production workshop and the storage place, and the protective fence and radar detection device will be added around the cart to ensure the safe and barrier-free operation of the cart.
Trackless transfer cart for the transport of coils 80t In the transfer of heavy mold products, more use trackless flat car, the series of flat car with its own flexible rotation, space-saving, large load-bearing capacity, safety and reliability and other advantages to get a lot of ke favor. It is used to transfer coils to and from the mold workshop and the working workshop, and the rubber mats are laid on the table to prevent the mold from moving.

Multi-drive transfer cart heavy load transportation designed to move loads up to 1500 tons. with multiple drive-powered types, the Multi-Drive Flatbed Transporter makes moving heavy loads across a facility easy and automated. The video has been shown 8 different transfer cart for industrial use, such as rail transfer cart for industrial production lines, anti-high temperature ladle trackless transfer cart, double rail transfer cart transportation in parallel, universal wheel trackless transfer cart, straight and ”S” paths are available for trackless transfer torrey, hydraulic lifting table transfer car. We can also provide customized services, you can show your needs(load capacity, material dimension, local voltage, etc.)

The main application of trackless transfer cart for outdoor and indoor operation 200t;trackless transfer cart for outdoor and indoor operation 200ts for brick factories, kiln factories, refractory factories, ceramic factories and roasting factories;Electric transport vehicles for engineering, tunnel and sanitation, electric dump trucks, electric sanitation clearing vehicles, etc.Electric transport vehicles and electric dump trucks are also used in flour mills, mineral processing plants, foundry mills, chemical plants, furnace materials factories, farms and so on.